radius arms

[hillbilly]

who do them , and is there a price/quality comparison I can get from somewhere.


.

[Hardcorr]

For what car?

Cheers
Corry

[hillbilly]

oops.....nissan gu

[chunderlicious]

contact superior engineering. his will prolly be the best price and quality around

[v840]

Bubs can also make pretty much whatever you want.

[guzzla]

Ive got snake racing radius arms and not that there is anything wrong with them its just that if i had my time again I would get a flip arm conversion for the same money.

[Tapage]

but the flip arm conversion involve work .. and the snakes arms are bolt on ..

[badger]

in my experiance snake arms are the dearest ane most over ratd arms out there.
get superior , 2Dxtreme or Oondy ams they are all essentially the same thing

[chunderlicious]

in my experiance snake arms are the dearest ane most over ratd arms out there.
get superior , 2Dxtreme or Oondy ams they are all essentially the same thing

i thought the same thig too, BUT superior arms are twice the size of 2dextreme arms. they are the same size the whole way as the 3rds arms are at the largest part..... very strong.

[benhl]

in my experiance snake arms are the dearest ane most over ratd arms out there.
get superior , 2Dxtreme or Oondy ams they are all essentially the same thing

i thought the same thig too, BUT superior arms are twice the size of 2dextreme arms. they are the same size the whole way as the 3rds arms are at the largest part..... very strong.

Who's ever broken a aftermarket arm of any brand?

[badger]

i beleive there was a convo on here last week about someone who hit a gaurd rail after one snapped.
noone would mention what brand tho.

i beleive it was a comp vehicle tho, and a stock rm prob woulda died the same way in the same conditions.



chunder, ill have to have a better look at micks when he takes the towel off his front links i must say tho i rate superiors stuff better than any of the other big brands and it is generally cheaper as well

[azzad]

OONDY makes some sweet arms you can pm him on here or can give you his email. His prices are hard to beat also.

Dazza

[hillbilly]

so......I suppose they are all competitivly priced. Im quessing they would all be around the $1200 mark. Anyone?




.

[buddha]

Just put these arms on the other day from BIG O 4x4 in SA.
$550 delivered with out bushes.
Definately inproved my GQs handling.

[azzad]

there OONDYs arms, like i said hard to beat his prices.

Dazza

[offroader-rama]

how much longer are they than standed, it looks like heaps i have 2dextream with standed gu bushes going in my gq when i can be bothered i'd like to compare length as for constuction they look very similar its not funny.

[azzad]

I can assure you that OONDY makes his own.

I can measure my 3" arms if you want?

[unimog]

2DXTREME ARMS ARE THE BEST ARMS GOING AROUND IN MY MIND BECAUSE HE MAKES HE'S ARMS FOR 3/4/5/6/7 INC NOT LIKE SNAKE RACING WHO MAKE 1 FOR 3/4/5 AND 1 FOR 5/6/7 SO WITH SAKE ARMS THERE GOOD FOR 4 OR 6 IF YOU HAVE 3/5 OR 5/7 LIFT HAVE A LOOK AT THE PINN IT WILL BE NOT SPOT ON IT WILL BE UP OR DOWN A BIT THEN HAVE A LOOK AT THE COILS THERE BE MORE LOAD ON ONE SIDE OF THE COIL. HOPE THAT HELP YOU

[offroader-rama]

i just looked at mine suitting on my shed floor they are different not by a lot but where it bolts on to the chassis the steel that hold the thread is heaps bulkier.
and if you could mesure that would be good to compare

[azzad]

2DXTREME ARMS ARE THE BEST ARMS GOING AROUND IN MY MIND BECAUSE HE MAKES HE'S ARMS FOR 3/4/5/6/7 INC NOT LIKE SNAKE RACING WHO MAKE 1 FOR 3/4/5 AND 1 FOR 5/6/7 SO WITH SAKE ARMS THERE GOOD FOR 4 OR 6 IF YOU HAVE 3/5 OR 5/7 LIFT HAVE A LOOK AT THE PINN IT WILL BE NOT SPOT ON IT WILL BE UP OR DOWN A BIT THEN HAVE A LOOK AT THE COILS THERE BE MORE LOAD ON ONE SIDE OF THE COIL. HOPE THAT HELP YOU

Big O arms are also made to suit what ever lift required.

[mickyd555]

Tom

I have oondy arms and i wouldnt use anyone elses. you can come have a look at them if you want, bang for buck they are great. Andrew is also a great guy to deal with especially considering he is in adelaide and we are in brisbane

[hillbilly]

gday Mick, hows your truck coming along. Was thinking of getting the 2dextreme arms , but will look into the oondy ones,
Will try and google some info on them.
I'll be running 4" lift and pushing the diff forward an inch.

Was thinking of running 3rds rear arms, any comments?


.

[offroader-rama]

from what i've seen the laser cut arms are stronger than the cast arms as the cast arms are more prone to brake of near the threed going to the chassis but i'm shore thats in extreme cases.

down side to laser cut arms are they are much more bulky but i dont think that ,that realy is a issue in a big patrol.

IMHO

[2dextreme]

in my experiance snake arms are the dearest ane most over ratd arms out there.
get superior , 2Dxtreme or Oondy ams they are all essentially the same thing

i thought the same thig too, BUT superior arms are twice the size of 2dextreme arms. they are the same size the whole way as the 3rds arms are at the largest part..... very strong.

At the time of this post superior eng were selling my arms. Superior eng had not put their new arms on the market at that stage up until recently.

Dale

[nastytroll]

I have lost count of how may arms I have bought from Dale at 2Dextreme, All for different trucks. I have never heard of any breaking yet.

They are good a product and have been prooven in many competitions.

[SuperiorEngineering]

I update on our arms are as follows,
in "Superior High Flex Arms std lift to suit drop boxes one side only needed $650 with genuine bushes total
3 inch lift both 2 arms with genuine bushes $1300 total
4-5 inch 2 arms needed with genuine bushes $1300 total
6-7 inch 2 arms needed with genuine bushes $1300 total
These arms come with a full money back guarantee if they do not flex more than anyone elses on the market and i'm not talking a little more flex i mean most gains over other arms are 10inch on articulation and the bushes arern't tearing like other brands. The lower 3 inch lift wont get that much gain as you will not get a big enough shock in their but std with drop boxes and 4-5 and 6-7 expect big gains.
To put that pic in proportion they are 38 boggers if you notice one side of the guard to the other with 20mm coil wire




Standard type radius arms that everyone else sells is as follows
3 inch $1080 with genuine bushes
4-5 inch $1080 with genuine bushes
6-7 inch $1080 with genuine bushes
All our arms are made from BHP steel and have never had a failure .

We have many of our arms in winch challenge trucks, rock crawling trucks , road driven and everyday 4wd's and have no problems.
You can talk direct to us at superior engineering or any of our resellers can help customers out as well.
Shane at suspension stuff has done some testing and their is a in depth post you can read.
http://www.outerlimits4x4.com/ftopic117558-0-asc-0.php

[mickyd555]

I update on our arms are as follows,
in "Superior High Flex Arms std lift to suit drop boxes one side only needed $650 with genuine bushes total
3 inch lift both 2 arms with genuine bushes $1300 total
4-5 inch 2 arms needed with genuine bushes $1300 total
6-7 inch 2 arms needed with genuine bushes $1300 total
These arms come with a full money back guarantee if they do not flex more than anyone elses on the market and i'm not talking a little more flex i mean most gains over other arms are 10inch on articulation and the bushes arern't tearing like other brands. The lower 3 inch lift wont get that much gain as you will not get a big enough shock in their but std with drop boxes and 4-5 and 6-7 expect big gains.
To put that pic in proportion they are 38 boggers if you notice one side of the guard to the other with 20mm coil wire




Standard type radius arms that everyone else sells is as follows
3 inch $1080 with genuine bushes
4-5 inch $1080 with genuine bushes
6-7 inch $1080 with genuine bushes
All our arms are made from BHP steel and have never had a failure .

We have many of our arms in winch challenge trucks, rock crawling trucks , road driven and everyday 4wd's and have no problems.
You can talk direct to us at superior engineering or any of our resellers can help customers out as well.
Shane at suspension stuff has done some testing and their is a in depth post you can read.
http://www.outerlimits4x4.com/ftopic117558-0-asc-0.php

i think there is a for sale section for all that

[SuperiorEngineering]

Mickyd555 not being smart but the original post was stated as


who do them , and is there a price/quality comparison I can get from somewhere.

[patrol28]

no discount for you mick555