Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60 Series windscreen wiper.

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 291
Joined: Wed Jun 16, 2004 10:44 am
Location: Adelaide

60 Series windscreen wiper.

Post by sambo »

My windscree wiper has a lot of slop. Sometimes it stops about 200mm from the bottom of the windscreen, and a few times it has gone right off the bottom.

I haven't looked at it yet but has anyone else had the same problem, how did you fix it.

Will an 80series windscreen wiper and mechanism fit into a 60series.
05 Manual HDJ100R
84 HJ60 w/12HT, twin locked with longfields
Top
Posts: 69
Joined: Tue Mar 25, 2008 10:28 am
Location: Geelong

Post by Tristo4.0 »

I have the same problem, can some one help us out??
1983 HJ60 FTW

Dont take life so seriously.... No one gets out alive!!
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

Both wipers have the same slop? Linkage/s rooted under cowl. Prone to rusting out.

Only one wiper has slop? Tighten retaining nut on offending wiper arm(after positioning the arm in its correct location).
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

10 or 12mm bolt under the plastic cover, needs tightening!
hands and mums dont count!!!
Top
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

The first thing to check is the Retaining nut on the pivot end of the wiper arm. If they are both tight then it is probably one of the linkages. The plastic bushes in the ends of the wiper linkages. You can still get them genuine and they're fairly cheap.
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Top
Posts: 291
Joined: Wed Jun 16, 2004 10:44 am
Location: Adelaide

Post by sambo »

Is an 80 series mechanism the same as i think i can get one for free.
05 Manual HDJ100R
84 HJ60 w/12HT, twin locked with longfields
Top
Posts: 58
Joined: Mon Jan 09, 2006 10:17 pm
Location: Victoria

Post by coights 40th »

x2 what Ruffy said on plastic bushes.
Same problem with my old 60, replaced the bushes and all is ok now.
Top
Posts: 413
Joined: Sun May 29, 2005 11:35 pm
Location: Launceston, Tas

Post by Sixty's Guy »

This may help...................

http://www.outerlimits4x4.com/ftopic104 ... ght=wipers
AKA Mark.
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests