HI everyone,
Fitting a boost guage to my ln 106 lux, but not sure where to fit the t piece in to the whole system.
Ive looked at the guide on toyotasurfasn but theirs look different to mine even though i have a ct20 turbo.
Any guides or pictures of where yours are hooked in would be great.
Ive got everything sorted except this rather important bit.
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
fitting boost guage to 3l hilux, now with problem - ta guts
Moderators: toaddog, Elmo, DUDELUX
fitting boost guage to 3l hilux, now with problem - ta guts
Last edited by thehanko on Sun May 25, 2008 7:27 pm, edited 1 time in total.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Goto *
Nah I dont think I have a pic of it.
I sold the Lux about a year ago.
It was simply a couple of inches of hose to slip over the barb on the intake manifold with a brass barb the same size and an olive style nylon fitting screwed into that in the end of the hose.
Sounds complicated but is really simple.
I sold the Lux about a year ago.
It was simply a couple of inches of hose to slip over the barb on the intake manifold with a brass barb the same size and an olive style nylon fitting screwed into that in the end of the hose.
Sounds complicated but is really simple.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
www.teamcarnage.net
This would measure vacuum, as the rocker vent is normally before the turbo intake!ausyota wrote:On my old Lux I made an adaptor to go on where the rocker cover vent tube used to go onto the intake manifold.
It is really simple, we need info on where it plugs into the cross pipe or manifold after the turbo.
I'm the sharpest tool in the shed!
I said it goes where the rocker vent used to go into the intake manifold before the turbo was fitted. It is a barbed fitting on the intake manifold that gets blanked off when the turbo is fitted and the vent pipe then goes to pre turbo.v6hilux wrote:This would measure vacuum, as the rocker vent is normally before the turbo intake!ausyota wrote:On my old Lux I made an adaptor to go on where the rocker cover vent tube used to go onto the intake manifold.
It is really simple, we need info on where it plugs into the cross pipe or manifold after the turbo.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
www.teamcarnage.net
That's OK!ausyota wrote:I said it goes where the rocker vent used to go into the intake manifold before the turbo was fitted. It is a barbed fitting on the intake manifold that gets blanked off when the turbo is fitted and the vent pipe then goes to pre turbo.
I didn't have all the info first go!
It's a good place in that case!
I'm the sharpest tool in the shed!
ON this picture one end goes to the guage, but where does the other end go?phippsy wrote:The shop that did the injector pump after I put on the turbo tapped a hole on the pipe, one side goes to the boost compensator and the other to the boost guage.
sorry to be such a turbo tech dunce.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Goto *
ah... just learnt to read, boost compensator. do all set ups have a boost compensator? if so can i just t piece that instead of risking metal into the intake or having to remove bits?
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Goto *
no you wont have a boost compensator unless you got one fitted or your running a surf injector pump. i did the same setup as ausyota, modified the the old breather fitting on the standard intake manifold, very easy with a few clamps, hose and fittings. definalty boost there, my gauge doesnt even go into vac at an idle.
Is this the 10mm (approx) pipe which sits in the center of the top of the manifold? in the picture that was added to this topic it would be just hidden by the left edge of the brass t piece.v6hilux wrote:That's OK!ausyota wrote:I said it goes where the rocker vent used to go into the intake manifold before the turbo was fitted. It is a barbed fitting on the intake manifold that gets blanked off when the turbo is fitted and the vent pipe then goes to pre turbo.
I didn't have all the info first go!
It's a good place in that case!
ON mine it has been capped off with a rubber cap and a pipe clamp?
If so then it looks like an excellent place to fit it. Is there an easy way to down size the tube that would fit this fitting to the tiny tube of the boost guage?
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Goto *
yeah thats the one, i just used a piece of pipe about 2 inches long clamped it to the original breather fitting on the manifold, put the fitting that came with the gauge on the end of the boost gauge line and push the fitting into the open end of the piece of hose on the manifold and clap it in there. worked for me but it depends what gauge you have you may just have to find a different fitting.
[/img]UM, things arent looking to good
check out
http://www.outerlimits4x4.com/sutra1386398.php#1386398
for my issues
I fitted the boost guage here is this right?
check out
http://www.outerlimits4x4.com/sutra1386398.php#1386398
for my issues
I fitted the boost guage here is this right?
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Goto *
SORRY.
I thought as it was a new question the right thing to do was to open a new thread.
The heading of this thread is no longer relevant to the question involved, as im no longer trying to learn about how to install it.
My new question is is my turbo stuffed.
I didnt mean to snub the people already giving me help hence why i invited their comments on the new question.
I didnt know i was doing the wrong thing - Once again Sorry.
I have re asked the question in this thread so feel free to delete the other thread (though im still not sure why it was an issue, im sorry for my error).
I thought as it was a new question the right thing to do was to open a new thread.
The heading of this thread is no longer relevant to the question involved, as im no longer trying to learn about how to install it.
My new question is is my turbo stuffed.
I didnt mean to snub the people already giving me help hence why i invited their comments on the new question.
I didnt know i was doing the wrong thing - Once again Sorry.
I have re asked the question in this thread so feel free to delete the other thread (though im still not sure why it was an issue, im sorry for my error).
Last edited by thehanko on Sun May 25, 2008 6:50 pm, edited 1 time in total.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Goto *
IM concerned that my CT20 turbo on my LN106 HIlux 2.8L 3l Diesel is not working i.e no boost.
I fitted a boost guage this afternoon and its not registering any movement under revs - if anything it is creating a tiny vacume.
The picture below indicates where i fitted the boost guage.
I removed this bung and the boost gauge and gave it a rev, at idle you can feel a pulsing air flowing out (like a mini exhaust would feel) When reved the amount of air comming out reduced but didnt stop completely.
PLEASE TELL ME IM WRONG.
If you cant tell me im wrong advice would be great...
I fitted a boost guage this afternoon and its not registering any movement under revs - if anything it is creating a tiny vacume.
The picture below indicates where i fitted the boost guage.
I removed this bung and the boost gauge and gave it a rev, at idle you can feel a pulsing air flowing out (like a mini exhaust would feel) When reved the amount of air comming out reduced but didnt stop completely.
PLEASE TELL ME IM WRONG.
If you cant tell me im wrong advice would be great...
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Goto *
Ha ha know the feeling. cheersGuts wrote:No biggy.
Its still about your turbo and boost gauge and the mod you asked about in this thread.
Like I said, no biggy, but I needed something to do around here
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Goto *
Ok so back to topic.
Hooked up the guage again (flea bay purchase - second hand speco boost/vacuume guage) unfortunately it shows a -4 psi reading instead of 0 which confuses things a bit but the change should indicate boost.
On the advice given I went for a drive rather than just revving it in the driveway. Found a big hill and flogged its guts.
On the up side we have boost! on the down side it maxed out at about 5psi at 3000+ revs uphill.
I thought normal for a ct20 was about 9psi.
if 9 is normal... the turbo is working but not well? or do i just need to wind up the boost from standard?
Could the guy who fitted it (home job) have resricted it somwhere by mistake?
thanks again
Oh and being able to edit titles would be a good idea.
Hooked up the guage again (flea bay purchase - second hand speco boost/vacuume guage) unfortunately it shows a -4 psi reading instead of 0 which confuses things a bit but the change should indicate boost.
On the advice given I went for a drive rather than just revving it in the driveway. Found a big hill and flogged its guts.
On the up side we have boost! on the down side it maxed out at about 5psi at 3000+ revs uphill.
I thought normal for a ct20 was about 9psi.
if 9 is normal... the turbo is working but not well? or do i just need to wind up the boost from standard?
Could the guy who fitted it (home job) have resricted it somwhere by mistake?
thanks again
Oh and being able to edit titles would be a good idea.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Goto *
-4psi + 9psi = 5 psi ? Is the gauge not zeroed?thehanko wrote:Ok so back to topic.
Hooked up the guage again (flea bay purchase - second hand speco boost/vacuume guage) unfortunately it shows a -4 psi reading instead of 0 which confuses things a bit but the change should indicate boost.
On the up side we have boost! on the down side it maxed out at about 5psi at 3000+ revs uphill.
I thought normal for a ct20 was about 9psi.
when the engine is turned off or at idle the guage shows -4 psi or a vacuume of 4psi.
At maximum boost its showing 2psi.
2 - -4 = 6 psi. but thats assuming the guage still has an accurate spring rate. maybe this is the problem.
Sorry but I didnt understand the bit about the in line restrictor? whet do you mean?
At maximum boost its showing 2psi.
2 - -4 = 6 psi. but thats assuming the guage still has an accurate spring rate. maybe this is the problem.
Sorry but I didnt understand the bit about the in line restrictor? whet do you mean?
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Goto *
Who is online
Users browsing this forum: No registered users and 45 guests