Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

maxxis creepy crawlers

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 61
Joined: Thu May 19, 2005 8:39 pm
Location: Wodonga, Vic

maxxis creepy crawlers

Post by OL GQ UTE »

has anyone here used maxxis creepy crawlers?? im looking at 37x12.5x16's. how do you find them...any good at all on mud? or just good for rocks
Top
Posts: 780
Joined: Wed Apr 26, 2006 7:11 pm
Location: darwin again

Post by simkell »

search

http://www.outerlimits4x4.com/ftopic132 ... py+crawley
http://www.outerlimits4x4.com/ftopic118 ... py+crawley
http://www.outerlimits4x4.com/ftopic435 ... py+crawley
MUD, MUD, GLORIOUS MUD!
Top
Posts: 61
Joined: Thu May 19, 2005 8:39 pm
Location: Wodonga, Vic

Post by OL GQ UTE »

had a read thanks for that, only question is rim size? is 8 inch ok or do i need to go 10 in the 37?
a few guys spoke about it with the 35's but not sure bout 37's
Top
Posts: 15
Joined: Mon Jun 19, 2006 9:43 pm
Location: Newcastle

Post by Doug67 »

You'll need 10 inch
Top
Posts: 845
Joined: Sun Dec 17, 2006 8:28 pm
Location: Bairnsdale, East Gippsland

Post by jet-6 »

Best for a 10 to get a static balance
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

8" is fine.

I ran and will continue to run the same tyre on an 8" rim.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

dont ya love it when you get a general consensus...
Top
Posts: 445
Joined: Mon Apr 18, 2005 12:32 pm
Location: Victoria

Post by mistaboz »

They will all work.
8 inch rim, you'll find the tyre will crown more.

Paul.
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

bogged wrote:dont ya love it when you get a general consensus...
:D
Top
Posts: 152
Joined: Wed Feb 27, 2008 12:28 pm
Location: Here, there, everywhere!

Post by tt6_lux »

I'm happily using the same tire and size on 8'' non-bead locked rim.
Top
Posts: 29
Joined: Sat Jul 21, 2007 4:10 pm
Location: brisbane

Post by kebwaa »

8'' rim will be fine just don't run super low pressure. i ran 36/12.5 pedes on my old gq wagon. 12 to 18 psi would be fine. they moulded around rocks nice and never looked like comin of the bead.
DUAL CAB STYLE SIDE GQ.
Top
Posts: 61
Joined: Thu May 19, 2005 8:39 pm
Location: Wodonga, Vic

Post by OL GQ UTE »

ive got 8's so if i can get away with using them i will, sounds like they will be ok.
Top
Posts: 152
Joined: Wed Feb 27, 2008 12:28 pm
Location: Here, there, everywhere!

Post by tt6_lux »

kebwaa wrote:8'' rim will be fine just don't run super low pressure. i
4.5 psi


Image
Last edited by tt6_lux on Tue May 27, 2008 7:01 pm, edited 1 time in total.
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

kebwaa wrote:8'' rim will be fine just don't run super low pressure. i ran 36/12.5 pedes on my old gq wagon. 12 to 18 psi would be fine. they moulded around rocks nice and never looked like comin of the bead.
in response to this I always ran mine at 8-10 psi , no beadlocks and never had a drama!
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

OL GQ UTE wrote:ive got 8's so if i can get away with using them i will, sounds like they will be ok.
They will be fine. My only other bit of advice is if you are using them to travel short distances on road you will still not need any more than 26psi in them.

I ran them to fraser and back and full time onroad at 26psi, started at 35 and worked my way down to this optimum pressure. (this was under a Range Rover, 2ton vehicle)
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

GRIMACE wrote:
kebwaa wrote:8'' rim will be fine just don't run super low pressure. i ran 36/12.5 pedes on my old gq wagon. 12 to 18 psi would be fine. they moulded around rocks nice and never looked like comin of the bead.
in response to this I always ran mine at 8-10 psi , no beadlocks and never had a drama!
Different rims also vary in how well they retain the bead.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 29
Joined: Sat Jul 21, 2007 4:10 pm
Location: brisbane

Post by kebwaa »

4.5 psi

how much does that thing weigh?. And he is probably running internal bead locks being a rock crawler.
DUAL CAB STYLE SIDE GQ.
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

Slunnie wrote:
GRIMACE wrote:
kebwaa wrote:8'' rim will be fine just don't run super low pressure. i ran 36/12.5 pedes on my old gq wagon. 12 to 18 psi would be fine. they moulded around rocks nice and never looked like comin of the bead.
in response to this I always ran mine at 8-10 psi , no beadlocks and never had a drama!
Different rims also vary in how well they retain the bead.
I have found the 8" retain better ;)

EDIT: this is with steel wheels, never been lucky enough or bling enough to have alloys :oops:
Top
Posts: 152
Joined: Wed Feb 27, 2008 12:28 pm
Location: Here, there, everywhere!

Post by tt6_lux »

kebwaa wrote:
4.5 psi
how much does that thing weigh?. And he is probably running internal bead locks being a rock crawler.
1100 kg, that's the heavier end (with engine). No internal bead lock, just a set of standard alloy Toyota SR5 rims.
Top
Posts: 61
Joined: Thu May 19, 2005 8:39 pm
Location: Wodonga, Vic

Post by OL GQ UTE »

bag down nicely, not that ill need to run pressures that low
Top
Posts: 61
Joined: Thu May 19, 2005 8:39 pm
Location: Wodonga, Vic

Post by OL GQ UTE »

ive decided on either creepy's or trepadors, opinions from people with experience would be great. live in vic so see a bit of mud
Top
Posts: 412
Joined: Fri Jul 14, 2006 6:03 pm
Location: brisbane

Post by rvh96 »

Trepadors shit on creepys
'05 GU Patrol coil cab ST
6" lift
Tough dogs
Snake Racing drop arms
3rds Rear Arms
Twin ARB air lockers
37" trepadors
ARB bullbar
WARN winch
High flow turbo
3" mandrel bent exhaust
Top
Posts: 39
Joined: Fri Aug 31, 2007 7:47 pm

Post by LuXaNator »

Ive got creepy's and my mate has treps,and i honestly cant seem to put one over the other,there both a awsome tyre,but ild still go the creepy's coz ive got em :twisted:
Top
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne

Contact:
Contact GUJohnno

Post by GUJohnno »

I have the 35x12.5x15" Creepies.
They clear the mud out nicely.

They crown a lot on an 8" rim
Image

But sit a bit better on an 8" beadlocked rim. This is at 7PSI. Very strong side walls.
Image

Can't comment on how the 37"s will sit on the rim.
My club
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
Top
Posts: 152
Joined: Wed Feb 27, 2008 12:28 pm
Location: Here, there, everywhere!

Post by tt6_lux »

rvh96 wrote:Trepadors shit on creepys
If I catch a Trapador taking a shit on my Creepy's I'll give it a good kick in the sidewall.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 39 guests