exhausts

Post by **RB zook** » Tue Dec 16, 2003 7:42 pm

im not shaw this topic has been talked about before, who makes an exhaust system for sierras. im after some info. thanks.

Post by **zookjedi** » Tue Dec 16, 2003 7:47 pm

are you talking headers? or full system? standard ,custom? lukey , hurricane and genie all do headers (extractors) and any exhaust shop can do what ever you want , or are you wanting to buy parts and fit yourself? as there fitting is usally no different from the price you pay to get to put on yourself

Post by **RB zook** » Tue Dec 16, 2003 7:53 pm

yeah id probably get a ful system. lukey? any idea of cost and would it better to just get extractors. i just want a exhast system that will give some increase in peformance.

Post by **zookjedi** » Tue Dec 16, 2003 8:12 pm

yes get extractors! power increase isnt great but is noticeable.

do a search lots have spoken about the subject .

my hole system 2" and extractors , no cat as its leaded, cost around $500-700 carn't remember it was a hole 8 months ago i think.

just think of your exhaust tip before getting it done! i was sucking fumes big time as it finished level with the tail gate and faced straight out .
ANGLE it out the side, unless its a hard top

Post by **RB zook** » Tue Dec 16, 2003 8:17 pm

soft top. i think ill just get extractors it will be cheaper. or would it better for the ful system. im not shaw wat to do.

Post by **RB zook** » Tue Dec 16, 2003 8:18 pm

ive tryied searching but maby im goin bout it wrong.

Post by **zookjedi** » Tue Dec 16, 2003 8:41 pm

just click on search type exhaust hit topic submit its all there good luck .
imo if your gunna get extractors unless your exhaust is bigger than standard change the hole thing.

Post by **RB zook** » Wed Dec 17, 2003 5:24 pm

ill just get a 2 inch system. it will set me back about 700. i guess that would be the best way to.

Post by **Damo** » Wed Dec 17, 2003 5:33 pm

IMO 2" is too big. It will be too loud and you'll get better torque with something smaller. I wouldnt go any bigger than 1.75" on a 1.3 engine.

Post by **zookjedi** » Wed Dec 17, 2003 8:13 pm

yes the 2" is very loud but works fine, i put an adapter 1.3/4" on the tip to reduce noise . but feels stronger with it of, given that it revs out cleaner at the top end . have you got or are you gunna change your cam or air cleaner set up in the near future? if so 2" would be fine if not go 1 3/4".

Post by **RB zook** » Wed Dec 17, 2003 8:19 pm

i will be getting a snorkel, will a k&n airfilter do the job

Post by **skippy** » Wed Dec 17, 2003 8:20 pm

RB zook wrote:yeah id probably get a ful system. lukey? any idea of cost and would it better to just get extractors. i just want a exhast system that will give some increase in peformance.

ring an exhaust shop./

Post by **RB zook** » Wed Dec 17, 2003 8:27 pm

yeah that would be a good idea

Post by **zookjedi** » Wed Dec 17, 2003 9:19 pm

what ever size you get will be an improvement over standard be it 1 3/4 or 2" the choice is yours, but remember you can always put a reduced tip on a 2" system but you carn't expand a 1 3/4" to 2"

Post by **RB zook** » Thu Dec 18, 2003 5:33 am

yeah i just go the 2 inch and reduce it with a tip if i need to.
it wil sound good with 2 inches of exhaust

Post by **skippy** » Thu Dec 18, 2003 6:53 pm

RB zook wrote:yeah i just go the 2 inch and reduce it with a tip if i need to.
it wil sound good with 2 inches of exhaust

good should read: "ultra light aeroplane"
bahahahahaaaaa///......I live with that noise at the moment with tune length genie extractors and a 2" system.

Post by **RB zook** » Thu Dec 18, 2003 7:28 pm

a bit of noise is always goood

hehe

Post by **crispy** » Thu Dec 18, 2003 8:22 pm

hey its good for a little while

until the noisey suzuki phase wears off, then its downright annoying

although everyone can tell when ur coming and ya get some weird looks when the noisey car turns out to be a little zuki, u learn to live wif it :armsup:

Post by **RB zook** » Thu Dec 18, 2003 8:25 pm

wat does it sound like a ford laser with a fulllly sik cannon. or is it more of a deacent v8 sound. :twisted:

Post by **Guy** » Fri Dec 19, 2003 12:24 am

I love the note mine makes with a fuly sik set of extractors and 2 inch system .. didnt notice any drop inlow end performance but a definate improvemt in mid range and top end was quicker to rev out as well ...

Post by **crispy** » Fri Dec 19, 2003 4:39 pm

nah man it sounds great, nothing else around has a note like mine, but u'll find that u'll want to keep driving it flat out to hear the sound, well thats wot happened to me :twisted:

. but it definantly worth it in the end

Post by **RB zook** » Fri Dec 19, 2003 7:07 pm

sounds good boys cant wait.

Post by **stumped** » Sat Dec 20, 2003 10:10 pm

got mine done by a mob in thornton (near newcastle) that do their own mandrel bending. 2" mandrel with hi-flo cat and muffler for $600. cheaper if ur cat isn't shot (-$240)

performance increase is definately noticeable, more pull lower, and revs much more freely. isn't very noisy at all, just enuf to be enjoyed

Post by **RB zook** » Sun Dec 21, 2003 2:03 pm

nice

Outer Limits 4x4 Board

exhausts

exhausts

Who is online