Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
swb pajero vs swb landcruiser
Moderator: -Scott-
swb pajero vs swb landcruiser
Do the pajeros go as well as landcruiser?ino 4x4 comes down to driving but are the nh swb pajeros as capable as landcruisers??
Thanks
Thanks
well depends the cruisers have the solid front axel.. more flex to generally keeping wheels on the ground but then again it is a toyota...
pajeros can be very capable cars depends what sort of driving you want to do..
not sure on the petrols but my 2.5td revs at 3000 to do 100kmp/h and im pretty sure thecruisers getbigger engines..
pajeros can be very capable cars depends what sort of driving you want to do..
not sure on the petrols but my 2.5td revs at 3000 to do 100kmp/h and im pretty sure thecruisers getbigger engines..
landcruisers and pajeros r in different classes all together u cant compare really landys have solid axles and paj's have ifs so landys with afew mods can go to hard and extreme stuff where the paj goes from easy to medium and if u do alot of mods it can go hard but thats about it ifs lets it down.
91 mavrick, 33" muddies, 3" sus, 2" body, crawler gears, dual batteries, winch.
This was a question I asked myself before I bought mine - It was a Paj or a coiled SWB cruiser.
After seeing some SWB Prado's in action I decided to bu the Paj Brilliant on the road and as standard the Prado's suspension is pretty poor.
When I say Prado I mean coil sprung SWB Crusiers that look like Bundera's
Funky, If you have only done Medium tracks with your Paj, get out and try some more!
P.S. - A Cruiser isn't a landy A Landy is made in Britian and owned by the Indians! Typically leaks oil and lucas wiring which is factory fitted with smoke installed ready to come out at any time.
After seeing some SWB Prado's in action I decided to bu the Paj Brilliant on the road and as standard the Prado's suspension is pretty poor.
When I say Prado I mean coil sprung SWB Crusiers that look like Bundera's
Funky, If you have only done Medium tracks with your Paj, get out and try some more!
P.S. - A Cruiser isn't a landy A Landy is made in Britian and owned by the Indians! Typically leaks oil and lucas wiring which is factory fitted with smoke installed ready to come out at any time.
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel
2008-2009-2010-2011 Pavlova in the shed.
2008-2009-2010-2011 Pavlova in the shed.
that makes more sense,aussydluke wrote:isn't the 40 series a swb?? the bunderra or something like that??
when i think about landloosers i think 60,80,100series etc...
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
well it realy depends where u ask the question as to what answer you get. as every one above has proved.
swb cruisers were bj40 and 70, the 73 was mwb and 75 lwb troopy. the bundy has the coils, the swb mwb and lwb has the leafs generaly and the pajeros major down fall is the IFS as stated. my pick of em would be the bj70 rv, coily deisel. very rare to find a good one that still works in original nick. but the live fronts help alot if you wanna do some sirious offroad and modding for height and bigger wheels. IFS modding is more xypensive unless u wanna reck some cv's pretty quik.
hmmm, hope i got all that mostly right
swb cruisers were bj40 and 70, the 73 was mwb and 75 lwb troopy. the bundy has the coils, the swb mwb and lwb has the leafs generaly and the pajeros major down fall is the IFS as stated. my pick of em would be the bj70 rv, coily deisel. very rare to find a good one that still works in original nick. but the live fronts help alot if you wanna do some sirious offroad and modding for height and bigger wheels. IFS modding is more xypensive unless u wanna reck some cv's pretty quik.
hmmm, hope i got all that mostly right
i have a 93 swb jtop paj. 3ltr. on 33s mine was performing better than my mates swb 70series crusier (leaf sprung) on 33s. i was doing hard yakka trips with guys in crusiers on 35s and most of the time getting as far as them. did the bodylift and put 35s on, i was going as far if not further than them. cvs are a weak point on pajeros... but if you drive accordingly they last ages. i blew 1 cv in 4years. and i punished my truck.
capability wise, id say they are close if not the same.
comfort wise, id say pajero by a mile
driveline strength id give to the crusier, just.
engines, well the 2.5dt of the pajero arnt knowen for being reliable, and toyotas usually are, so toyota there.
pajeros are lighter.
im very happy with my paj... my mate has sold his crusier....
Sam
capability wise, id say they are close if not the same.
comfort wise, id say pajero by a mile
driveline strength id give to the crusier, just.
engines, well the 2.5dt of the pajero arnt knowen for being reliable, and toyotas usually are, so toyota there.
pajeros are lighter.
im very happy with my paj... my mate has sold his crusier....
Sam
93 jtop pajero, SAS'd (almost)... http://www.outerlimits4x4.com/viewtopic.php?f=4&t=125224
and cost of lifting goes to? what did you have to do to get 35's under yours without scraping?
coily cruisers and paj's are cumfyer by far, mate has an 80s coily that is a mile cumfier then a leafd 60s but any cruiser with springs can be flexable and comforatable with the right spring set up, u just gota figure out what that is, and which modles springs are re-useable.
coily cruisers and paj's are cumfyer by far, mate has an 80s coily that is a mile cumfier then a leafd 60s but any cruiser with springs can be flexable and comforatable with the right spring set up, u just gota figure out what that is, and which modles springs are re-useable.
mate of mine has a 86 swb with 2.6 motor. 2i body lift 2i suspension lift with lwb springs and xtended shackles. with 33i mudies and he goes anywere the gq's and cruisers on 35's with less fuss. often does things they can't and on all the trips i've bin on with him has only punctured a fuel tank. his car is awsome.
were as my other mate with a bj70. on 33's. his car has to be driven like it's stolen to go the places the paj does with ease, and it's rougher slower and sufers more breakages.
swb pajero anyday over anytype of swb cruiser. and i'm a yota man.
but when u go to the mwb bj73/74. diferent story there i tell ya.
were as my other mate with a bj70. on 33's. his car has to be driven like it's stolen to go the places the paj does with ease, and it's rougher slower and sufers more breakages.
swb pajero anyday over anytype of swb cruiser. and i'm a yota man.
but when u go to the mwb bj73/74. diferent story there i tell ya.
kaylee 2004 hdj78 RV. 33 mickey atz's, winchbar, 3i lift, 3i exhoust, spoties, roofracks and ufh. pimped interior .
86 lwb zook wt soa, 33's, locked, bard up, prety lights. monster tacho:/
86 lwb zook wt soa, 33's, locked, bard up, prety lights. monster tacho:/
without scraping... hmmmm.
when i put the 33s on i did the balljoint flip, cut the bumpstops wound the torsions in the front. fitted lwb lifted kings in the rear. i also had to trim the bumper ends slightly and massage the rear of the wheel arch part of the guard with a sledge hammer. still rubbed slightly on up travel but not enough to rip the tyres to pieces.
when i fitted 35s, half worn 35 baja claws, i fitted a 2'bodylift and removed the bumper corners. barly rubbed at all.
Sam
when i put the 33s on i did the balljoint flip, cut the bumpstops wound the torsions in the front. fitted lwb lifted kings in the rear. i also had to trim the bumper ends slightly and massage the rear of the wheel arch part of the guard with a sledge hammer. still rubbed slightly on up travel but not enough to rip the tyres to pieces.
when i fitted 35s, half worn 35 baja claws, i fitted a 2'bodylift and removed the bumper corners. barly rubbed at all.
Sam
93 jtop pajero, SAS'd (almost)... http://www.outerlimits4x4.com/viewtopic.php?f=4&t=125224
Cruisers have big diffs so a Paj on same size tyres will go further in rutty situations. They also have a great big leaf pack hanging beneath the axle.
Paj CV's are not to bad Sam! If you'v only broken 1 and i've not broken one I'd say there pretty good as far as IFS CV's go.
As for Toyota Motors... Heard of the 2LT......? lol
Leaf sprung cruisers do flex pretty well and it is in a hill climb with ruts that ultimately without at least 1 locker a Pajero lets itself down.
Having seen WACKO's Paj, for him to fit 35's, he just put them on then drove it like he stole it and from then on, they fit.
Paj CV's are not to bad Sam! If you'v only broken 1 and i've not broken one I'd say there pretty good as far as IFS CV's go.
As for Toyota Motors... Heard of the 2LT......? lol
Leaf sprung cruisers do flex pretty well and it is in a hill climb with ruts that ultimately without at least 1 locker a Pajero lets itself down.
Having seen WACKO's Paj, for him to fit 35's, he just put them on then drove it like he stole it and from then on, they fit.
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel
2008-2009-2010-2011 Pavlova in the shed.
2008-2009-2010-2011 Pavlova in the shed.
2lt come in the bunderas with 4 coils and little diffs weaker 4wd bits, bunderas are the original what turned into prados
what about the normal 70 swb and the 73 /74mwb cruisers with tough 3f motors and good diesel 4cyl 3b 13b and 1pz 5cyl motors ,thats it for aus the rest of the world still get the 6 cyl diesels and 4.5 petrols which make any paj pizz
what about the normal 70 swb and the 73 /74mwb cruisers with tough 3f motors and good diesel 4cyl 3b 13b and 1pz 5cyl motors ,thats it for aus the rest of the world still get the 6 cyl diesels and 4.5 petrols which make any paj pizz
it doesnt matter if its locked on 35"s,if ya cant drive then its just a waste of timeGO79 wrote:2lt come in the bunderas with 4 coils and little diffs weaker 4wd bits, bunderas are the original what turned into prados
what about the normal 70 swb and the 73 /74mwb cruisers with tough 3f motors and good diesel 4cyl 3b 13b and 1pz 5cyl motors ,thats it for aus the rest of the world still get the 6 cyl diesels and 4.5 petrols which make any paj pizz
but of course the pajero would be far superior lol
mike_nofx wrote:Is "Athol" what people with a lisp call him??
RAY185 wrote:I think it's delightful! So does my wife Bill.
Well I used to have a FJ40 on 32" tyres and had LSD rear, it was a capable truck but damn uncomfortable and heavy on fuel, and crap brakes when ever you got them wet, bought a Jtop and that would go far more places than the cruiser, now have the SWB hard top and that is luxury with suspension seats, running 265/75 16s which are pretty close to 32' tyres and the places I have been in the Paj I wouldnt have got there in the cruiser..
Found this on you tube its worth a laugh
http://www.youtube.com/watch?v=llDU2WScmDw
Found this on you tube its worth a laugh
http://www.youtube.com/watch?v=llDU2WScmDw
NH SWB Pajero 3.0L manual, rear locker, 265/75R16 KL71's, snorkel
.
NT LWB Pajero Exceed, factory rear locker, colour coded 18" Rims
.
NT LWB Pajero Exceed, factory rear locker, colour coded 18" Rims
Who is online
Users browsing this forum: No registered users and 7 guests