Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Loud click sound from rear axle (GU)
Loud click sound from rear axle (GU)
Hi. got a GU Wagon!
Went away for long weekend, and noticed a loud click from drivers rear axle, wheel assemble maybe diff? when taking off forward or reverse. doesnt sound good!
Diff oil full and clear.
Also i noticed tonight if i rock the rear wheels with the handbrake on and in gear , there is a fare amount of movement
Any advise!!
Grant.
Went away for long weekend, and noticed a loud click from drivers rear axle, wheel assemble maybe diff? when taking off forward or reverse. doesnt sound good!
Diff oil full and clear.
Also i noticed tonight if i rock the rear wheels with the handbrake on and in gear , there is a fare amount of movement
Any advise!!
Grant.
GU III TD42T UFI18G Cross Country IC, 20 PSI. Neeeeeed mooooore Fueeeeeel.
Re: noises
Jdaz4b wrote:it sounds like trailing arm bush to me
Just fitted new HD trailing arms with bushes!
A bit hard to tell when i have my head out the window, but it sounds like its from the wheel hub area.
GU III TD42T UFI18G Cross Country IC, 20 PSI. Neeeeeed mooooore Fueeeeeel.
Re: noises
wheel bearing?GUEEY wrote:Jdaz4b wrote:it sounds like trailing arm bush to me
Just fitted new HD trailing arms with bushes!
A bit hard to tell when i have my head out the window, but it sounds like its from the wheel hub area.
or did this start when the new bushes and arms were fitted?
Re: noises
Nah it started half way through our dargo drive yesterday.bogged wrote:wheel bearing?GUEEY wrote:Jdaz4b wrote:it sounds like trailing arm bush to me
Just fitted new HD trailing arms with bushes!
A bit hard to tell when i have my head out the window, but it sounds like its from the wheel hub area.
or did this start when the new bushes and arms were fitted?
The new lift gear has been in for about 5 weeks and i have done 2 other trips with no noises!
Grant
GU III TD42T UFI18G Cross Country IC, 20 PSI. Neeeeeed mooooore Fueeeeeel.
Re: Loud click sound from rear axle (GU)
Sounds like bearings to me. Is this rocking them inboard/outboard or rotating side to side on the axle?GUEEY wrote:Hi. got a GU Wagon!
Also i noticed tonight if i rock the rear wheels with the handbrake on and in gear , there is a fare amount of movement
Any advise!!
Grant.
[quote="fool_injected"]
For once I don't have a smart arse retort, usally I\m pretty handy :lol:[/quote]
For once I don't have a smart arse retort, usally I\m pretty handy :lol:[/quote]
I had a similar problem with my 04 GU. It was the brake pads moving in the brake calipers. Easy fix, just put some PBR anti rattle paste on the back of the pads and the problem was solved.
GQ. Supercharged LSX 427, 500rwkw. camtech cam,90mm Holley Throttle Body. twin 4"exhaust, big fuel system, King bypass shocks and bumpstops.
Re: Loud click sound from rear axle (GU)
Holding the wheel and rolling the tyre forward and backwards in the garage .Froon wrote:Sounds like bearings to me. Is this rocking them inboard/outboard or rotating side to side on the axle?GUEEY wrote:Hi. got a GU Wagon!
Also i noticed tonight if i rock the rear wheels with the handbrake on and in gear , there is a fare amount of movement
Any advise!!
Grant.
GU III TD42T UFI18G Cross Country IC, 20 PSI. Neeeeeed mooooore Fueeeeeel.
Had the same type of noise in our new 4 runner the other night. We had only had it for 2 hours and noticed the exact same noise and symptons on take off and reverse.
The problem? Loose wheel nuts on the rear.
Tightened up all the nuts and the problem dissapered.
Sound ssilly but try it. It may just be the same.
The problem? Loose wheel nuts on the rear.
Tightened up all the nuts and the problem dissapered.
Sound ssilly but try it. It may just be the same.
Spot on!!!PGS 4WD wrote:Tighten all the trailing arm bush bolts, the bush is moving so the steel inner tube is smaking the bolt, will do it once one way then once the other.
Joel
i checked it tonight.
The sound is coming from the chassis mount end of the rear traling arm!
i will try tightening it.
GU III TD42T UFI18G Cross Country IC, 20 PSI. Neeeeeed mooooore Fueeeeeel.
Who is online
Users browsing this forum: No registered users and 0 guests