and here is the fronts
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Has anyone installed 75 springs in to a 60?
Moderators: toaddog, Elmo, DUDELUX
ok so ive bought some parabolic springs 75s for the front which are fitted and look like they are going to work well ,also got some 75 rear parabolic springs too and fitted them but had to move the front hanger forwrds 2"to keep the diff in the same spot ,but what i need to know now is does my rear shackles have too much angle ,i was thinking about moving the shackle hanger back about 1-1.5" what do you guys think???
and here is the fronts
and here is the fronts
88vx 60's sahara twin factory locked on 37's
Maybe flex it up a bit and see if the shackle hits the chassis rail.
Can you measure from the centre of the hub to the bottom of the guard for me. I'm interested to know how much lift you got from those springs.
Can you measure from the centre of the hub to the bottom of the guard for me. I'm interested to know how much lift you got from those springs.
AKA Mark.
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho
there is nothing wrong with that or hulsty's shackle angle. As long as it handles fine then that is perfect.
Everyone goes and puts longer shackles in there, but all it does is give a bit more lift. It's not until you put longer main and wraps in do you get the full benefit. As long as your axle can compress to the stops before the shackle gets completely horizontal that is good, because otherwise your springs will warp to go any higher.
with the shackles the way they are there you will be getting max benefit from the the spring length/shackle combination on droop, with the limiting factor now being shock length.
the more shackle angle you have the softer the ride will be too. all these guys getting longer (read - vertical) shackles also get harsher bumps, and castor problems. with the longer leaves the castor should come back to normal-ish when combined with the shackles
the only bad thing is that any leaf set up that flexes really well, will flog bushes out faster than you can buy them due to the difference in angle between spring and shackles/chassis eyes at full flex
Everyone goes and puts longer shackles in there, but all it does is give a bit more lift. It's not until you put longer main and wraps in do you get the full benefit. As long as your axle can compress to the stops before the shackle gets completely horizontal that is good, because otherwise your springs will warp to go any higher.
with the shackles the way they are there you will be getting max benefit from the the spring length/shackle combination on droop, with the limiting factor now being shock length.
the more shackle angle you have the softer the ride will be too. all these guys getting longer (read - vertical) shackles also get harsher bumps, and castor problems. with the longer leaves the castor should come back to normal-ish when combined with the shackles
the only bad thing is that any leaf set up that flexes really well, will flog bushes out faster than you can buy them due to the difference in angle between spring and shackles/chassis eyes at full flex
http://www.populationparty.org.au/
mate im on the gold coast at the moment and wont be home till sunday so i will measure the height for you then.Sixty's Guy wrote:Maybe flex it up a bit and see if the shackle hits the chassis rail.
Can you measure from the centre of the hub to the bottom of the guard for me. I'm interested to know how much lift you got from those springs.
88vx 60's sahara twin factory locked on 37's
Nothing to do with putting 75 spings in a 60, just what off the shelf springs can do, it could be improved with longer shocks but not much.
OME HD front springs, OME 400kg constant load rears, Nitrocharger Shocks, Anti Inversion Shackles.
A reasonable amount of flex for off the shelf suspension.
OME HD front springs, OME 400kg constant load rears, Nitrocharger Shocks, Anti Inversion Shackles.
A reasonable amount of flex for off the shelf suspension.
93 1HZ Troopy Double Locked, Lifted and Gassed with NO Benefits by D-GAS
D-GAS= Dont - Give A Shit
D-GAS= Dont - Give A Shit
Who is online
Users browsing this forum: No registered users and 138 guests