Are the petrol and diesel gearbox's in the LN/RN65's the same?? G52, spline counts, transfer cases etc??
I have an old G52 box with a 21 spline output shaft , 4th gear gone bush, and another G52? ( bundera?) box that has a 27 spline output shaft. Is there an adaptor available to make my transfer case fit to the splines on the new box??
The extension housings fit OK.
Or is it a case of changing the output shafts in the box??
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hilux gearbox's
Moderators: toaddog, Elmo, DUDELUX
Hilux gearbox's
Custom body work by trees and rocks...
" Where's the party Officer "
Ruff Gq wrote "and i am so stupid that i don't know how it is done."
" Where's the party Officer "
Ruff Gq wrote "and i am so stupid that i don't know how it is done."
i know you can get adaptors to adapt a 23 or 26 tooth shaft to the 21 output on a G52 (ive got one as part of the adaptor to bolt the R151F to the G52 transfer for my surf swap)
But 27 tooth? Dunno....
But 27 tooth? Dunno....
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Re: Hilux gearbox's
The bundera box may be different to the lux box's (even with the same designation) as i think they ran a cruiser style transfer case (offset rear output). Hence an off-the-shelf adapter may not be available. May be able to swap output shafts for a hilux one?82 Lux wrote:Are the petrol and diesel gearbox's in the LN/RN65's the same?? G52, spline counts, transfer cases etc??
I have an old G52 box with a 21 spline output shaft , 4th gear gone bush, and another G52? ( bundera?) box that has a 27 spline output shaft. Is there an adaptor available to make my transfer case fit to the splines on the new box??
The extension housings fit OK.
Or is it a case of changing the output shafts in the box??
Who is online
Users browsing this forum: No registered users and 19 guests