Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

!AUTO ELECTRICIANS! Commodore Inhibitor switch

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 143
Joined: Sun Oct 22, 2006 9:33 pm
Location: Inner West, Sydney

!AUTO ELECTRICIANS! Commodore Inhibitor switch

Post by dawg runner »

Gday,

Here is one for the Auto electricians.

Getting to wiring the start circuit up for my 4 runner with VS V6 commodore motor.

I have the commo inhibitor switch which has 4 wires coming off it.

Black - Earth???
Green - Reverse lights.
Pink - Park ??
Grey - Neutral ??

How do i incorporate this into it so i can only start in N or P.

Has anyone out there done this? I am sure it has been done.

Ultimately i need it to start at the key then pass through
inhibitor switch to confirm it is in N or P then after that
to the starter solenoid to start.

I need to think about reverse lights as well.

Any info would be greatly appreciated as i am nearly on the road.

Thanks

Dave
"There is gold in them there hills"
Top
Posts: 523
Joined: Sun Feb 17, 2008 8:59 pm
Location: Flagstone QLD

Contact:
Contact Red04VXE

Post by Red04VXE »

What shifter are you using?
S.E.Qld Locals Crew.....
Top
Posts: 143
Joined: Sun Oct 22, 2006 9:33 pm
Location: Inner West, Sydney

Post by dawg runner »

Commodore shifter with commo inhibitor switch
"There is gold in them there hills"
Top
Posts: 1415
Joined: Sat Oct 15, 2005 2:09 pm
Location: Trying to hide the bus keys!

Post by v6hilux »

Looking at the VR diagram, which should be the same or close for the VS, it's a simple job.

Looking at the plug YB35, wires 434 and 1434 will be the start inhibitor (to operate the start (cranking) relay and wires 339 (to switched ignition power) and 29 (directly to globes) will work the reverse lights;

Image

Image
I'm the sharpest tool in the shed!
Top
Posts: 143
Joined: Sun Oct 22, 2006 9:33 pm
Location: Inner West, Sydney

Post by dawg runner »

Thanks heaps for the info v6 Hilux

A lot of help. This has got me on the straight and narrow.

Cheers

Dave
"There is gold in them there hills"
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 30 guests