Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Which auto do i have??

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 7
Joined: Fri Apr 18, 2008 8:14 am
Location: ChesterHill

Which auto do i have??

Post by mudduck »

Hi,the auto in my 95 jack keeps flashing check trans.I took it to a auto trans place and they told me the fault codes that came up were for the shift solonoids and the band apply solonoids.I was told that the box would need to be rebuilt to a sum of $3300.I spoke to another transmission place that does fourby's only and he said some jackaroo's were fitted with a toyota a340 auto box and these solonoids are a easy fix and the box isnt buggered.Does anybody know how to tell the difference between a holden box and this a340 box??
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

should be a tag on the side...it will have model such as aisin warner........
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Posts: 7
Joined: Fri Apr 18, 2008 8:14 am
Location: ChesterHill

Post by mudduck »

Nah,couldnt be that easy mate.Pulled off the bash plates and had a good look all over her and couldnt find any i.d plates.
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

should be near the shift housing...maybe 10cm x 8 cm.....
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Posts: 7
Joined: Fri Apr 18, 2008 8:14 am
Location: ChesterHill

Post by mudduck »

Will go and have another look.Thanks for the help.
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

There are two auto trans used.
One is the 4L30E the other is the A340H.
The A340H is identified by its tag I.D ...... 30-80LE on the build plate.
Jas
Posts: 7
Joined: Fri Apr 18, 2008 8:14 am
Location: ChesterHill

Post by mudduck »

Thanks guy's.i had another look last nite and found the tag but its too far gone to read.
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

mudduck wrote:Thanks guy's.i had another look last nite and found the tag but its too far gone to read.
get a wire brush onto it... it shouldbt be "to far gone" as its not in a spot that it should wear down as such...
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 417
Joined: Wed Jul 13, 2005 8:30 pm
Location: NSW

Post by Modified Toy »

A340 trans has one pan only and the 4l30E has two pans if they said it had a code for the band control solenoid sounds like a 4l30E (the very expensive one) just get some one to take the pan of first and cut the filter open if it's clean change the solenoids first, It is always suss though when you have mutiple trans codes could be and earth problem/computer problem also..
Posts: 1383
Joined: Tue May 06, 2008 8:12 pm
Location: Newcastle

Post by oldmate »

shouldn't the trans code be on the compliance plate?
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests