Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
gu III keyless entry/reprogramming??
gu III keyless entry/reprogramming??
hey guys i have just purchased a gu patrol III plus, and upon picking it up from the dealer only recieved 1 key(excuse was we can only give what we got) anyway so i have one key, and no keyless remote, i rang nissan and gave them the vin and they said that it did come out with the remote, hence i purchased one from nissan but am waiting to get it programed then came across how to program it myself (under the nu bible) and tried but couldnt get it to work.
1st question could my patrol no have come out with keyless?
2nd is the method of reprograming the remote not relavent to my patrol
Nissan Patrol Reference Document
Page 50 of 112
KEYLESS REMOTE - REPROGRAMMING
Heres how it’s done:
1. Get in your vehicle and close all the doors.
2. Using your drivers lock button, lock all doors.
3. After doors are locked take your ignition key and insert it and remove it from ignition
switch in a slow fashion (six times in and out).
4. The hazard lights should flash and the doors will unlock.
5. Re-lock the doors using the drivers lock button.
6. Put the key in ignition switch and turn to the on position. Do not start the engine or
you will have to start again.
7. When in the on position hit the lock button on the remote, your hazard lights should
flash.
any info would be great thanx
1st question could my patrol no have come out with keyless?
2nd is the method of reprograming the remote not relavent to my patrol
Nissan Patrol Reference Document
Page 50 of 112
KEYLESS REMOTE - REPROGRAMMING
Heres how it’s done:
1. Get in your vehicle and close all the doors.
2. Using your drivers lock button, lock all doors.
3. After doors are locked take your ignition key and insert it and remove it from ignition
switch in a slow fashion (six times in and out).
4. The hazard lights should flash and the doors will unlock.
5. Re-lock the doors using the drivers lock button.
6. Put the key in ignition switch and turn to the on position. Do not start the engine or
you will have to start again.
7. When in the on position hit the lock button on the remote, your hazard lights should
flash.
any info would be great thanx
key programming
thanx mate ill try it again, but i couldnt get the hazard lights to flash initally? i tried doing the key at a range of speeds and couldnt get a result??
GQ ute 4inch suspension, 2inch body 33's
This may or maynot help, but if you go to the bottom of the thread or do a search i'm sure you'll find something, Cheers, Wayne
http://www.patrol4x4.com/forum/showthread.php?t=12585
http://www.patrol4x4.com/forum/showthread.php?t=12585
key reminder? sorry im not sure what that is, i just realised to that my door light is staying and that probably is why the key programing isnt working as the computer prob thinks a door is still open,, which brings me to another question how is the best way to check which door is playing up, i tried going around with all the doors closed and the car running and opening a door at a time and pushing the button in and out each door at a time but cant even get a blink out of the light it just is constantly on, which makes me think that it might be wiring possibly???
GQ ute 4inch suspension, 2inch body 33's
It will be the back door, it will need adjusting, I normally lift the door (as they drop over time), on there hinges to get the alignment spot on then adjust the strikers to suit,
you will find that the larger door is not closed properly and if you slam it, it will close and the light will go out.
you will find that the larger door is not closed properly and if you slam it, it will close and the light will go out.
Living the dream on the hill that floods
Who is online
Users browsing this forum: No registered users and 37 guests