Could someone tell me whether or not the top and bottom links run paralell to each other?
If not, is anyone kind enough to measure/tell me the difference?
Simon
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GQ Rear Link Arms
No the lowers are narrower at the diff going wider at the chassis mounts and the uppers run parrallel to each other, just have a look at the angle the bosses are welded on.
+++++NOW ON FACEBOOK++++++
www.superiorengineering.com.au
Largest 4x4 online superstore
SPONSOR OF TOUGH TRACKS
DGR RACE TEAM
JOOMBIE RACING
AMADA XTREME RACE TEAM
MAYBELINE RACING
MMM RACING
www.superiorengineering.com.au
Largest 4x4 online superstore
SPONSOR OF TOUGH TRACKS
DGR RACE TEAM
JOOMBIE RACING
AMADA XTREME RACE TEAM
MAYBELINE RACING
MMM RACING
depenfds if you are looking from the top, or looking from the side? he didnt specify, and first thought i had was looking from the side, so in a way i guess we are both right?SuperiorEngineering wrote:No the lowers are narrower at the diff going wider at the chassis mounts and the uppers run parrallel to each other, just have a look at the angle the bosses are welded on.
Who is online
Users browsing this forum: No registered users and 97 guests