Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Just wondering how many k's do you recon i should do on my new td42ti before i up the boost. I have done about 2000k's on the new motor. The first 500 was towing a 2.5 ton trailer up and down big hills loading it right up. The rest has just been around town and a few camping trips.
It has been run in on about 14-15psi max boost and i want to turn it up to 20psi.
(pump and turbo are done etc,etc)
So what do ya recon??
Is 2000 enough or should i at least wait until 5000 or should i wait till 10000
uzdnabuzd wrote:Just wondering how many k's do you recon i should do on my new td42ti before i up the boost. I have done about 2000k's on the new motor. The first 500 was towing a 2.5 ton trailer up and down big hills loading it right up. The rest has just been around town and a few camping trips.
It has been run in on about 14-15psi max boost and i want to turn it up to 20psi.
(pump and turbo are done etc,etc)
So what do ya recon??
Is 2000 enough or should i at least wait until 5000 or should i wait till 10000
Cheers
Just do it now and dont thrask the crap out of it....... Im running 23 psi in mine at the moment and doesnt always sit on that..... However mines now done 120k......
For all your HID and LED stuff
http://offroadindustries.com.au/
Check us out on Facebook for weekly specials
www.facebook.com/pages/Offroad-Industries/137501182955527
uzdnabuzd wrote:Just wondering how many k's do you recon i should do on my new td42ti before i up the boost. I have done about 2000k's on the new motor. The first 500 was towing a 2.5 ton trailer up and down big hills loading it right up. The rest has just been around town and a few camping trips.
It has been run in on about 14-15psi max boost and i want to turn it up to 20psi.
(pump and turbo are done etc,etc)
So what do ya recon??
Is 2000 enough or should i at least wait until 5000 or should i wait till 10000
Cheers
Just do it now and dont thrask the crap out of it....... Im running 23 psi in mine at the moment and doesnt always sit on that..... However mines now done 120k......
How many k's did you have on it when you up'd the boost??
Thanks, I have had 15 psi on it from the start! Hope that is ok?
Does it go well with 23psi? Do you know, does your pump have a 12mm plunger in it? Or is it a tricked up gu one?
uzdnabuzd wrote:Thanks, I have had 15 psi on it from the start! Hope that is ok?
Does it go well with 23psi? Do you know, does your pump have a 12mm plunger in it? Or is it a tricked up gu one?
Cheers
was a standard gu one but had the guts replaced and yes does now have a 12mm plunger...... does go quite well........
For all your HID and LED stuff
http://offroadindustries.com.au/
Check us out on Facebook for weekly specials
www.facebook.com/pages/Offroad-Industries/137501182955527