Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

WHATS LEGAL THESE DAYS??????????

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 92
Joined: Sat Feb 23, 2008 6:28 pm
Location: brisbain QLD

WHATS LEGAL THESE DAYS??????????

Post by whythef@#!not »

I live in QLD, and want to know what the highest LEGAL suspension you can go, springs and body and whats the biggest tyre you can run??????
and not get fingered

im guessing tyre size is different for individual cars so you all know have got a GQ

and i know removing swaybars is illegal, are those auto-disconnect swaybars legal
Posts: 446
Joined: Wed Jan 02, 2008 8:50 am
Location: Mackay, Sunshine State

Re: WHATS LEGAL THESE DAYS??????????

Post by clm434 »

whythef@#!not wrote:I live in QLD, and want to know what the highest LEGAL suspension you can go, springs and body and whats the biggest tyre you can run??????
and not get fingered
Variable depending on make/model/year of car, what aftermarket lifts have been engineered for it already and dependant on how nice the coppa is feeling when he/she pulls ya up.
[quote="Ruffy"]P.S. woober woober is a technical term describing the audible tone emitted from harmonic air vibration.[/quote]

F/S Holden V6 auto to Mitsu kit incl exhaust for Triton conversion.
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: WHATS LEGAL THESE DAYS??????????

Post by bogged »

whythef@#!not wrote:I live in QLD, and want to know what the highest LEGAL suspension you can go, springs and body and whats the biggest tyre you can run??????
Im not sure, but I think there *maybe* bout 40000 threads asking same question.

but wait till NCOP comes out, apparently Qld will be let loose then with the new rules.
they are due out anytime in the next 100000 years
Posts: 1379
Joined: Mon May 07, 2007 8:28 pm
Location: West of Woodridge, North of Ipswich, South of Oxley, East of Wacol

Post by chikoroll_ »

suspension is an increase of the 1/3rd bumpstop distance - rule of thumb is 2" though, some can actually get 1" more, some less

tyres- 15mm IFS, 50mm Solid axle front

track width increase- 26mm's so bigger tyres might need lesser offset rims

body lift- 2" engineered only


swaybars must be connected when onroad if factory fitted, after market swaybar disconnects are legal
'98 Jackaroo
Bullbar, 32" muddies, Homebrew Timber centre console, Homebrew 3" Stainless rubber bend snorkel, Homebrew Steel rear bumper, Campervan interior
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

chikoroll_ wrote:suspension is an increase of the 1/3rd bumpstop distance - rule of thumb is 2" though, some can actually get 1" more, some less
Pretty much my understanding.
chikoroll_ wrote:tyres- 15mm IFS, 50mm Solid axle front
You might want to check this. There are some modifications which are different for IFS vs solid axles front and rear, but I don't think tyre size is one of them. Until the NCOP is adopted, it's 15mm larger. NCOP allows 50mm for 4wd, but I suggest you call the Qld Transport Vehicle Modification line - I found them to be quite helpful when I was up there.
chikoroll_ wrote:track width increase- 26mm's so bigger tyres might need lesser offset rims
Again, check. I think 26mm is the difference for IFS vehicles, but beam axles front and rear are allowed 50mm
chikoroll_ wrote:body lift- 2" engineered only
Mine required pre-approval from Qld Transport, then an department inspection - no engineer. When I did mine, 2" was definitely the limit - no exceptions.
chikoroll_ wrote:swaybars must be connected when onroad if factory fitted, after market swaybar disconnects are legal
I've heard this, but never seen anything in the regs. When I had my 4by engineered in SA, the engineer wasn't the slightest bit concerned that my rear swaybar had been removed - it passed the handling tests without it, and that was all that mattered. His report doesn't mention it, so I hope it shows up in his photos...
User avatar
Nev
Posts: 621
Joined: Wed May 25, 2005 10:00 am
Location: Brisbane, Australia

Post by Nev »

What Scott says is correct
01 GU Patrol 4.2TD Wagon
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

or maybe just maybe you could actually ask the authorities yourself about your own car and get the low down from them instead of relying on the info from a nameless faceless person on the internet
Ransom note = demand + collage
Posts: 129
Joined: Fri Nov 10, 2006 12:18 am
Location: Brisbane

Post by 1patrol »

Grimbo your right but they will not give you a definate answer.. saying that i had my GQ defected recently took me visits to 3 different branchs of QLD transport to get it passed as it was and rules are pretty much exactly what chicko has explained...i hate QLD :(
Posts: 826
Joined: Mon Mar 20, 2006 1:08 pm
Location: Redcliffe

Post by berad »

I dont know why you would ask on an internet site ahah. Youll get a million slightly twisted answers, everyones been done for petty shit and everyone has got away with illegal shit, and noone in trans will tell you black and white.

End of rant.
Posts: 92
Joined: Sat Feb 23, 2008 6:28 pm
Location: brisbain QLD

Post by whythef@#!not »

why dont i ask the authorities, i have done and the amount of different answers i get, to queensland transport its alright you drive down the street and get a ticket for it..

and as far as asking on here, you can tell which people have a fair idea of what they are talking about and which people are idiots posting useless shit, if you aint gonna post anything usefull about the question DONT POST ANYTHING

looks like i will be goin 2' lift and 2' body, and will have to look into the tyres a bit more

i am pretty sure in qld they are pretty strict on the swaybars, so if the disconnects are legal, will invest in a set of those

cheers for some of the input
nick
Posts: 1574
Joined: Tue Mar 21, 2006 7:34 am
Location: Greenbank - Home of the web wheelers

Post by booflux »

Make sure you get the bodylift inspected and you should be right with the 2+2. With the tyres Qld follows the ADRs which state no more than a 15mm increase in diameter and a track increase of 25mm for a IFS and 50mm for a solid. Doesnt matter if its solid, IFS 2wd or 4wd 15mm increase is all you get.
Toy: 98 TJ with some mods and some bling
Tourer and daily: 120 Prado with some mods
e32
Posts: 11
Joined: Fri Jun 27, 2008 3:51 pm
Location: Vic

Post by e32 »

Interesting, i got a hilux with 3" Body lift and 35" tyres, it was engineered about 6 years ago, and in the report it clearly states all these mods are engineered,

With the new laws, is this still legal?
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

e32 wrote:Interesting, i got a hilux with 3" Body lift and 35" tyres, it was engineered about 6 years ago, and in the report it clearly states all these mods are engineered,

With the new laws, is this still legal?
Victoria has very different laws to QLD so not even remotely comparable. Yes it should still be legal in Victoria as long as no other mods have been done and everything is road worthy but best bet if you are worried is to find out from vicRoads yourself. Also make sure you still have all the engineers reports and carry a copy with you when you drive the vehicle.
Ransom note = demand + collage
e32
Posts: 11
Joined: Fri Jun 27, 2008 3:51 pm
Location: Vic

Post by e32 »

yeah all mods r engineered, cheers. The only thing is, i think it has slightly higher springs, how much higher than stock are you allowed to go without having it engineered?

Also im surprised that u cant rock a fat 4 wheeler in QLD, u see so many there
Posts: 512
Joined: Sun Jul 01, 2007 6:04 pm
Location: cairns

Post by defmec »

become friends with some one in nsw and have the rego and your license there then qld transport cant do diddly squat as long as you dont get pulled over to often
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

Marrying your sister is still not legal.
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Posts: 3237
Joined: Sun Aug 21, 2005 7:24 pm
Location: victoria point qld

Post by dirtyGQ »

I would pay double just to have rec/club rego like vintage and hotrods have
THE GRASS MAY BE GREENER ON THE OTHER SIDE BUT YOU STILL GOTTA MOW IT.
Posts: 1279
Joined: Wed Jul 28, 2004 9:49 pm
Location: IN THE SHED

Post by GOT MUD »

dirtyGQ wrote:I would pay double just to have rec/club rego like vintage and hotrods have
agree
PUT YOUR HANDS UP IF YOU WANT TO GO FASTER
RTD Racing
OFFROAD CARTEL
Posts: 446
Joined: Wed Jan 02, 2008 8:50 am
Location: Mackay, Sunshine State

Post by clm434 »

dirtyGQ wrote:I would pay double just to have rec/club rego like vintage and hotrods have
Too bad they (hotrods) must be over 30 yrs old, must comply with all/any ADRs relevant for that model, and are not actually free from modification laws.

But yes, it would be great if there was a recreational/concession rego for modified 4x4s. Aparently tall 4x4 rigs and semis are the reason people die on the roads all the time.
[quote="Ruffy"]P.S. woober woober is a technical term describing the audible tone emitted from harmonic air vibration.[/quote]

F/S Holden V6 auto to Mitsu kit incl exhaust for Triton conversion.
Posts: 1650
Joined: Wed Jun 06, 2007 10:12 pm
Location: ipswich

Post by sloshy »

chickoroll_ wrote: tyres- 15mm IFS, 50mm Solid axle front
I got pulled up 4 weeks ago, the limit is 15mm over standard no matter if it is torsion bar, coil or leaf. I was in my GU.

But that was just that coppa, they are all different, depends if they got laid the night before.
cheers Dan

Licenced Carpenter
I do everything, free quotes
Brisbane west/Ipswich/rural
PM me
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

sloshy wrote:
chickoroll_ wrote: tyres- 15mm IFS, 50mm Solid axle front
I got pulled up 4 weeks ago, the limit is 15mm over standard no matter if it is torsion bar, coil or leaf. I was in my GU.

But that was just that coppa, they are all different, depends if they got laid the night before.
that coppa was correct, its 15mm wether its torsion bar, coil leaf or the bat mobile.
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

I have had some 2" lift coils made up for the rear that give the same flex as a 3" lift so you can run a 3" lift shock on the rear. I have normal duty and heavy duty rear 2" lift flexy coils. The only mod needed is a longer rear brake hose.

I don't have these on my web site yet, I just received them Friday. It has been raining today so they haven't been tested yet either.

I don't know if someone at the transport department would find that illegal. Someone might be able to tell me.

Shane
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Posts: 1379
Joined: Mon May 07, 2007 8:28 pm
Location: West of Woodridge, North of Ipswich, South of Oxley, East of Wacol

Post by chikoroll_ »

sloshy wrote:
chickoroll_ wrote: tyres- 15mm IFS, 50mm Solid axle front
I got pulled up 4 weeks ago, the limit is 15mm over standard no matter if it is torsion bar, coil or leaf. I was in my GU.

But that was just that coppa, they are all different, depends if they got laid the night before.
what size tyres were you running? and what did you do to get pulled over?
'98 Jackaroo
Bullbar, 32" muddies, Homebrew Timber centre console, Homebrew 3" Stainless rubber bend snorkel, Homebrew Steel rear bumper, Campervan interior
Posts: 1650
Joined: Wed Jun 06, 2007 10:12 pm
Location: ipswich

Post by sloshy »

chickoroll_ wrote:
sloshy wrote:
chickoroll_ wrote: tyres- 15mm IFS, 50mm Solid axle front
I got pulled up 4 weeks ago, the limit is 15mm over standard no matter if it is torsion bar, coil or leaf. I was in my GU.

But that was just that coppa, they are all different, depends if they got laid the night before.
what size tyres were you running? and what did you do to get pulled over?
Running 315/75 r16's, was dropping the missus and her friends at the Ipswich cup, I was stopped by one of the coppers directing traffic, lucky it was only a verbal warning. He said it comes under the anti hooning laws now so you don't get a defect notice anymore but you get a nice notice to appear in court. Then the 2nd time caught its 48 hours impound then 3rd time it can be confiscation.
cheers Dan

Licenced Carpenter
I do everything, free quotes
Brisbane west/Ipswich/rural
PM me
Posts: 1379
Joined: Mon May 07, 2007 8:28 pm
Location: West of Woodridge, North of Ipswich, South of Oxley, East of Wacol

Post by chikoroll_ »

ah ok, so you were running 35's

i'd stick to 33's

for only 1"lift difference, they arn't as obvious, 35's just look too big, so are extremely obvious
'98 Jackaroo
Bullbar, 32" muddies, Homebrew Timber centre console, Homebrew 3" Stainless rubber bend snorkel, Homebrew Steel rear bumper, Campervan interior
Posts: 1650
Joined: Wed Jun 06, 2007 10:12 pm
Location: ipswich

Post by sloshy »

chikoroll_ wrote:ah ok, so you were running 35's

i'd stick to 33's

for only 1"lift difference, they arn't as obvious, 35's just look too big, so are extremely obvious
Funny thing though when I was waiting to go he to walked over and crouched down to look at the writing on tyre, took him a minute or so to find where the size was written. I was thinking " here we go" :x
cheers Dan

Licenced Carpenter
I do everything, free quotes
Brisbane west/Ipswich/rural
PM me
Posts: 2765
Joined: Wed Jan 14, 2004 10:32 pm
Location: somewhere out there

Post by shorty_f0rty »

sloshy wrote:
chikoroll_ wrote:ah ok, so you were running 35's

i'd stick to 33's

for only 1"lift difference, they arn't as obvious, 35's just look too big, so are extremely obvious
Funny thing though when I was waiting to go he to walked over and crouched down to look at the writing on tyre, took him a minute or so to find where the size was written. I was thinking " here we go" :x
so if they are going to the trouble to look at the size on the tyre are they going to go to the trouble to look at teh tyre placard, figure out the difference and then give you a ticket? or just give you a ticket and let you sort it out later?

even 7.50r16(about 32") vs 33" is more than 15mm difference. i have heard 1 tyre size increase is generally accepted but how anal are they going to get? by the way.. i got defected for 33's even tho the placard (which the cop didnt look/ask for) said 7.50r16.
Built, not bought!
'84 BJ42 - sold! :(
'79 Coiled and turbo diesel'd FJ55
Posts: 1379
Joined: Mon May 07, 2007 8:28 pm
Location: West of Woodridge, North of Ipswich, South of Oxley, East of Wacol

Post by chikoroll_ »

he might have actually been interested in the fourby, he did let you off afterall, and just gave you a heads-up
'98 Jackaroo
Bullbar, 32" muddies, Homebrew Timber centre console, Homebrew 3" Stainless rubber bend snorkel, Homebrew Steel rear bumper, Campervan interior
Posts: 1650
Joined: Wed Jun 06, 2007 10:12 pm
Location: ipswich

Post by sloshy »

chikoroll_ wrote:he might have actually been interested in the fourby, he did let you off afterall, and just gave you a heads-up
Yeah very lucky, stupid thing now though defects are classed as hooning :?
cheers Dan

Licenced Carpenter
I do everything, free quotes
Brisbane west/Ipswich/rural
PM me
Posts: 1379
Joined: Mon May 07, 2007 8:28 pm
Location: West of Woodridge, North of Ipswich, South of Oxley, East of Wacol

Post by chikoroll_ »

well it doesn't really matter what it is named as, they are still illegal modifications, and in the revenue raisers eyes, are dangerous, therefore worthy of taking your money

....bloody ridiculous how there isn't a way to get it legal though....
'98 Jackaroo
Bullbar, 32" muddies, Homebrew Timber centre console, Homebrew 3" Stainless rubber bend snorkel, Homebrew Steel rear bumper, Campervan interior
Post Reply

Who is online

Users browsing this forum: No registered users and 152 guests