Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
VT Flywheel
Moderators: toaddog, TWISTY, V8Patrol, Moderators
VT Flywheel
Does anyone know if a vt commodore has a rigid flywheel? Cheers
Re: VT Flywheel
There is something odd about them. I remember when they first came out they were having problems with them and you couldnt use a VS flywheel on them. But im sure the bolt pattern is the same. I always assumed they were a dual mass flywheel but have never actually seen one to confirm that.GUpatrol02 wrote:Does anyone know if a vt commodore has a rigid flywheel? Cheers
Yep, VT manual flywheel is dual mass.
Exedy do a clutch/flywheel kit to replace it, most manufacturers recommend the replacement of a dual mass flywheel with the clutch change.
Exedy do a clutch/flywheel kit to replace it, most manufacturers recommend the replacement of a dual mass flywheel with the clutch change.
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Well they are all following you...
No they ain't, I'm just in front...............
Re: VT Flywheel
is it holden v8 five liter or v6 or a gen 3GUpatrol02 wrote:Does anyone know if a vt commodore has a rigid flywheel? Cheers
as the vt come out with 3 differnt motoers
Last edited by cun7s on Sat Jul 05, 2008 7:05 pm, edited 1 time in total.
same motor as VS tooRhysta wrote:Just got my VU ute done.. its got a dual mass, same motor as a VT so I would imagine so..
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
As stated above they have dual mass flywheel..
We did a a clutch on a vu the other month or so and the customer got a new fly wheel from a company in QLD (i think) that does away with the dual mass idea...
They machine up a new flywheel (solid) if that makes sense bout 250 i think it was....
We did a a clutch on a vu the other month or so and the customer got a new fly wheel from a company in QLD (i think) that does away with the dual mass idea...
They machine up a new flywheel (solid) if that makes sense bout 250 i think it was....
94 HJZ 80 GXL 4 Inch lift 35s. TJM Accessories Front to back
I used to make alot of Solid replacement flywheels from 4340 ("Chrome Molly" as it is called on the forum) for Nick's Performance Clutches in Brisbane 07 32779403.
I made replacement flywheels for Everything from ZD30 patrol to RB26 skyline and rotors. From stock organic to triple plate buttons. We did a super light flywheel for the 13b that was running at 13000rpm.
At the time the complete ZD30 replacement clutch and flywheel was cheaper then the stock nissan deul mass flywheel.
Doug is the man there, Nick is his dad, its a family company and they are great to deal with.
I made replacement flywheels for Everything from ZD30 patrol to RB26 skyline and rotors. From stock organic to triple plate buttons. We did a super light flywheel for the 13b that was running at 13000rpm.
At the time the complete ZD30 replacement clutch and flywheel was cheaper then the stock nissan deul mass flywheel.
Doug is the man there, Nick is his dad, its a family company and they are great to deal with.
Who is online
Users browsing this forum: No registered users and 5 guests