Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

How wide are you and How tall?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

How wide are you and How tall?

Post by RUFF »

Ok just measured my rig before i start pulling it apart.

Currently i am
78"/1980mm wide on the Front
82"/2085mm in the rear
Measured from the very outside edge of the tyre.

And i am
80'/2030mm Tall measured at 4psi on 38.5/16/15 Claws.

How tall and wide are you?
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

what is your frame height?
TECH SCREW GURU
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

front is 1820 from outside to outside on tyres

where the roof joins the cab (heightest point) i am 1900 and ground to chassis is 650mm at the gear box x-member.




now convert that to feet and inches :finger:


NICK
TECH SCREW GURU
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Im only at 21"/535mm to the X member. Are you sure yours is that much higher?
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Is that the lowest point of the X member?
Top
Posts: 826
Joined: Sun Nov 24, 2002 4:24 pm
Location: Brisbane

Post by 12uke »

Specs for a Vitara wagon

1730mm(68inch) rear
1670mm(66inch) front
1800mm(71inch) high

Stock Vitara hight 1660mm
For a small 4by and a SUZUKI
The Ratkrawler

Surgery will fix your ugliness but not your stupidity?
Top
Posts: 1361
Joined: Thu Oct 24, 2002 8:47 pm
Location: Now in a happy place.

Post by Cheezy4x4 »

ATM my POS is about 500mm to the highest piont and from the widest points around 1100mm. :oops: :lol:
Top
Posts: 105
Joined: Thu Nov 28, 2002 8:17 pm
Location: woonona

Post by GRUNTLESS »

my pos
roof height 2200mm WAY TO HIGH :shock:
front 1800mm WAY TO NARROW
rear 1850mm
x member 625mm


I THINK ITS TIME TO DROP IT :roll: 3 inchs any way :?
only cheap wine comes in 5 litres..........
Top
Posts: 2388
Joined: Sun Nov 24, 2002 10:20 pm
Location: bacabugari

Contact:
Contact big red

Post by big red »

mines 2130 high and 2115 wide with 10.5r 35 centipedes
2970 wheelbase.
1605 front track.
1625 rear track.
its a GU ute
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
Top
JK
Posts: 3229
Joined: Tue Oct 22, 2002 9:00 am

Post by JK »

GRUNTLESS wrote:my pos
roof height 2200mm WAY TO HIGH :shock:
front 1800mm WAY TO NARROW
rear 1850mm
x member 625mm


I THINK ITS TIME TO DROP IT :roll: 3 inchs any way :?


Yeah mate, rip out that body lift for starters, you still have a long way to go before you have to worry about tyres scrubbing in your guards. :D

How's the old freckle after the Fred's run?
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

i am pretty tall

nev is pretty wide
hands and mums dont count!!!
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

bwaaahahahhaa, too funny

I hope Nev doesn't read this sh1t
Top
Posts: 4990
Joined: Sun Oct 20, 2002 7:22 pm
Location: Qld, Hilux Country

Contact:
Contact bubs

Post by bubs »

1820 wide - standard axles - 12.5in wide MT/Rs - 2in BS rims
1840 high to snokle - highest point on mine
470 to lowest point on x - member :?
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!

Custom Parts & Fabrication!
Ph: 0417 708 598
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

RUFF wrote:Is that the lowest point of the X member?



nar thats to the frame in the middle of the truck next to the cross member.


NICK
TECH SCREW GURU
Top
Posts: 39
Joined: Thu Nov 21, 2002 5:09 pm

Post by drunkenperformance »

520 to center of x member (std member), 1928 top of cab, not inc bar lights etc, track is std with 35 x 10.5 peeds, wheel base 2790
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

Width front and rear 1900mm
Height to crossmember 620mm
Wheel base 104 inches
Overall height.1900mm

HAPPY NEW YEAR TO EVERYONE :)
Top
Posts: 408
Joined: Fri Nov 08, 2002 8:09 am
Location: Mainland, NZ

Contact:
Contact suprasurf

Post by suprasurf »

1900 high
1800 across rear
1750 across front

Thought about lifting the toy some more but not sure about the best height for the surf.. ramp over vs tip over :?
will prob play with a better xmember, don't really like to much weight too high

couldn't help notice, I think, is was gruntless... its sooooo high, that looks scary ??
Top
Posts: 1361
Joined: Thu Oct 24, 2002 8:47 pm
Location: Now in a happy place.

Post by Cheezy4x4 »

Did a temp fit together today, and Im not to tall, not to wide and my wheelbase is how far apart my wheel hubs are. :lol: :finger:
NOW ABLE TOO SAY WHAT I WANT WITHOUT FEAR OF LOOSING SALES.
The person who says it cannot be done should not interrupt the person doing it.
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

..

Post by hypo »

nice comments mark not giving 2 much away there keep us guessin
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
JK
Posts: 3229
Joined: Tue Oct 22, 2002 9:00 am

Post by JK »

hmmm... now lets see. (flipping to page 7 of the Gregory's Patrol/Maverick service & repair manual...)

tall = 1,750mm
wide = 1,800mm
wheelbase = 2,970mm

estimated after a few "modifications"

tall = 2,100mm
wide = 2,100mm
wheelbase = 2,970mm
Top
Posts: 68
Joined: Sun Oct 20, 2002 7:43 pm
Location: brisbane

RE:how wide are you and how tall ?

Post by GRUB »

My POS is

Height:1990 Thats with 35" muddies
width:1730
Top
Posts: 365
Joined: Thu Oct 24, 2002 1:38 pm
Location: Brisbane, Nthsider

Post by redrocket »

93 swb pajero

2030mm short
1850mm thin
"If it ain't broken, smash it harder, then make it stronger!"
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 144 guests