Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

URGENT HELP fj45 steereing box question

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 407
Joined: Wed Mar 30, 2005 4:01 pm
Location: browns plains

URGENT HELP fj45 steereing box question

Post by Matt_88 »

should a 1977 fj45 steering box(non power steering) have oil or grease in it???
NECKUPYAPARROT4x4

Tosa_03

Proudly sponsored by and part of:-

Tosa Racing Co.
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Post by joel HJ60 »

Surely the teeth should be lubed, grease wise?
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Posts: 407
Joined: Wed Mar 30, 2005 4:01 pm
Location: browns plains

Post by Matt_88 »

well i just sold a fully rebuilt one on ebay and the guy has picked it up and taken it home, pulled it apart and now is telling me its full of grease and not oil and it has cost him 6 dollars in degreaser and an hour to clean it. and is trying to tell me onli one seal looks new.
this has never been used since rebuild.

he also wants a partial refund.

so im pretty sure they have oil and not grease in them.. am i right?

cheers
matt
NECKUPYAPARROT4x4

Tosa_03

Proudly sponsored by and part of:-

Tosa Racing Co.
Posts: 407
Joined: Wed Mar 30, 2005 4:01 pm
Location: browns plains

Post by Matt_88 »

please anyone?
NECKUPYAPARROT4x4

Tosa_03

Proudly sponsored by and part of:-

Tosa Racing Co.
Posts: 1094
Joined: Tue Feb 10, 2004 6:58 pm

Post by STIKA »

From the manual

Steering Gear Lubricant Type SAE90 gear oil
Steering Gear Lubricant quantity 0.6US qt/ o.5 Imp qt (0.6 liters)
Supported By
Milanco
Phones N Alarms
Buds Customs
Posts: 407
Joined: Wed Mar 30, 2005 4:01 pm
Location: browns plains

Post by Matt_88 »

ok so oil... why would the shop that rebuilt them put grease in them???
NECKUPYAPARROT4x4

Tosa_03

Proudly sponsored by and part of:-

Tosa Racing Co.
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Post by joel HJ60 »

The grease may just have been an assembly grease
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Posts: 1094
Joined: Tue Feb 10, 2004 6:58 pm

Post by STIKA »

Matt_88 wrote:ok so oil... why would the shop that rebuilt them put grease in them???
because they couldn't be bothered or couldn't fix the oil leaks
Supported By
Milanco
Phones N Alarms
Buds Customs
Posts: 273
Joined: Tue Jul 01, 2008 3:52 pm
Location: GREENBANK

Post by AZZA'S HJ47 »

the workshop manual advises that you either put in a thick oil or runny grease what does the bloke expect it to be lubed with hopes and dreams :2gunfire:
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

Who the fark pulls apart a brand new rebuilt steering box?? I won't even pull apart a farked one!! :lol:
Posts: 273
Joined: Tue Jul 01, 2008 3:52 pm
Location: GREENBANK

Post by AZZA'S HJ47 »

apparently this bloke tell him that its fine tell him to pull his head out of his A#@
Posts: 147
Joined: Sat Aug 04, 2007 1:28 pm
Location: Sydney

Post by little rusty »

well after a few years of driving I noticed the filler/breather on my steering box and discovered it should have oil. so i basically then poured half a litre of oil straight onto the driveway as the seals were no good. after 5 years of driving with no oil its a little loose but still fine.

grease would work if its worn a litlle but after paying to have it rebuilt I would expect new seals to be in it and oil not to leak out.

unless you were offering a guarantee/warranty on the ebay add - stuff it. we all make stupid purchases sometimes.
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

Its a fairly old school practice to fill manual steering boxes with a slurry of oil and grease. When I bought my 40 the steering box was dry and I filled it with a mix of about 70% grease and 30% engine oil. Never gave me an ounce of trouble and was a nice tight box (hehe) till I replaced it with 60 series power steering (about 3 years).
Posts: 407
Joined: Wed Mar 30, 2005 4:01 pm
Location: browns plains

Post by Matt_88 »

ok awsome thanks guys. well ill tell him to stop his bitching and wat not. not my fault, how was i supposed to know.

cheers
matt
NECKUPYAPARROT4x4

Tosa_03

Proudly sponsored by and part of:-

Tosa Racing Co.
Posts: 1590
Joined: Fri Jun 03, 2005 7:07 pm
Location: Tarneit, Vic

Post by matt.mcinnes »

Tell him to add the oil to the grease it will thin the grease and thicken the oil. Ah perfect. :D
http://www.fj40-2f-eti-locked-n-loaded.com

Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Post by jessie928 »

RAY185 wrote:Its a fairly old school practice to fill manual steering boxes with a slurry of oil and grease. When I bought my 40 the steering box was dry and I filled it with a mix of about 70% grease and 30% engine oil. Never gave me an ounce of trouble and was a nice tight box (hehe) till I replaced it with 60 series power steering (about 3 years).
yeah, i second that, a manual steering box does not need gear oil, a slurry of grease is all it needs!

Jes
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests