Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

PWR Barrel size for td4.2TD?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 193
Joined: Mon Oct 31, 2005 6:21 pm
Location: BEECHWORTH NTH EAST VIC.

PWR Barrel size for td4.2TD?

Post by GUte »

G'day all,
Could someone recommend a barrel size in the PWR intercooler for a 4.2 turbo diesel with typical exhaust, fuel and boost uprades.

Ta.
Al.
AL

00 GU ST coil cab
93 GQ RX TB42 turbo wagon
Top
Posts: 18
Joined: Sat Mar 31, 2007 9:45 pm
Location: Melbourne

Contact:
Contact gsinclai

Post by gsinclai »

We are in the process of using a 6x8 barrel. Have been told that is a good size. Got told to stay away from the 4x10, as it is too small.

Found this kit the other day.
http://www.turbonetics.com.au/AXTtd42ex ... cooler.pdf
Top
Posts: 618
Joined: Sun Mar 05, 2006 2:19 pm
Location: wakka wakka land

Contact:
Contact weeman

Post by weeman »

6 x 10 is what most people do even 6x8 is too small when i looked at it... Id rather just go a front mount which are extremely efficient.
For all your HID and LED stuff
http://offroadindustries.com.au/

Check us out on Facebook for weekly specials
www.facebook.com/pages/Offroad-Industries/137501182955527
Top
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Contact:
Contact Dzltec

Post by Dzltec »

6x10 is what we use, alot of fabrication to make it fit.


Good luck with it.



Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Top
Posts: 193
Joined: Mon Oct 31, 2005 6:21 pm
Location: BEECHWORTH NTH EAST VIC.

Post by GUte »

Thanks guys for your responses.

Al.
AL

00 GU ST coil cab
93 GQ RX TB42 turbo wagon
Top
Posts: 574
Joined: Wed Aug 17, 2005 11:49 am
Location: NZ

Post by nzdarin »

6x10 is what I have, but that is turbo vh45 not td42.
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
Top
Posts: 193
Joined: Mon Oct 31, 2005 6:21 pm
Location: BEECHWORTH NTH EAST VIC.

Post by GUte »

Fairdinkum, over a grand for the barrel and as Andy says a fair amount of fabrication.

I'll ponder this one for a bit.

Thanks.
Al.
AL

00 GU ST coil cab
93 GQ RX TB42 turbo wagon
Top
Posts: 10
Joined: Fri May 16, 2008 8:15 pm
Location: NORWEST SYDNEY

WATER AIR BARRELL

Post by GEEKEW »

Talk to alex at plasman in wetheril park in sydney
www.plasman.com.au
he makes awsom quality water-air barrell inetercoolers and the prices are pretty good for an autralian made product , also does front mounts which is what io`m goin for
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: WATER AIR BARRELL

Post by bogged »

Speak with Paul at Denco about their barrel ICooler....

See how much they charge to fit, adn dyno it all up at the same time.

Their service is outstanding, and I've documented here before how good I found it.
Top
Posts: 193
Joined: Mon Oct 31, 2005 6:21 pm
Location: BEECHWORTH NTH EAST VIC.

Post by GUte »

Thanks Geekew.

Yeah Bogged, they're only a hop skip from here.
But was thinking of fitting something myself and heading down your neck of the woods giving Andy a visit, getting injectors done while visiting friends and family.

Al.
AL

00 GU ST coil cab
93 GQ RX TB42 turbo wagon
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest