Question again thats prob been answered elsewhere (i looked couldent find anything)
Last night this squeek/ticking noise developed last night while doing some offroading i dident notice till i was finished, today when i went to wash the car i noticed oil on the front passenger side rim...when i took the plastic cover off i noticed that 2 bolts had fallen out and 2 where about to, upon checking the other side they were loose as well.
So 2 questions; did the 2000 GU II ST come with manual locking hubs (i think their after market ones)
Having these loose and leaking oil...would it have caused any damage.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Locking Hubs GU II
Re: Locking Hubs GU II
you want to fit up a set of manual hubs off a GQ.
Big GQ off here has them forsale sometimes
failing that put a wanted ad up, theres several wreckers on this forum and all are very trustworthy.
Also check out
http://www.patrol4x4.com/forum/
Big GQ off here has them forsale sometimes
failing that put a wanted ad up, theres several wreckers on this forum and all are very trustworthy.
Also check out
http://www.patrol4x4.com/forum/
www.photobucket.comfirestick wrote:yeah but its a whole car shot and not very clear
or email em, I'll upload it for ya.
Bit of both...technicaly its my first car. and it was either this or a discovery...but ive been in 2 of them when they rolled...so im not convinced on them.
At the moment im getting a 3" lift and the 285's, snorkel should go on soon and the lights will be finished tomorrow...then the rest of the radio and electrical gear goes in. Thats my starting plan...then some lockers and i was sugested getting some transfer gears.
Ultimatley im just having fun in it and thinking of ideas as they come.
At the moment im getting a 3" lift and the 285's, snorkel should go on soon and the lights will be finished tomorrow...then the rest of the radio and electrical gear goes in. Thats my starting plan...then some lockers and i was sugested getting some transfer gears.
Ultimatley im just having fun in it and thinking of ideas as they come.
Learn to drive it before spending big. Tires and good suspension will get you a LONG way in a std GU.firestick wrote:At the moment im getting a 3" lift and the 285's, snorkel should go on soon and the lights will be finished tomorrow...then the rest of the radio and electrical gear goes in. Thats my starting plan...then some lockers and i was sugested getting some transfer gears
No need for lockers or transfer gears, your better off learning without aids and you can learn your limits much better, and will be a better driver for it in the end.
YMMV.
Turns out i was wrong...this hubs were a totaly different problem...i worked out that the rubbing noise is my Hand Brake Backing Plate rubbing against the rest of the unit.
Would there be any problems in bending the backing plate out a bit...or would it haved move with a good reason...it doesent look to bent...but the space between the front bit and the backing plate is varied.
Would there be any problems in bending the backing plate out a bit...or would it haved move with a good reason...it doesent look to bent...but the space between the front bit and the backing plate is varied.
Who is online
Users browsing this forum: No registered users and 103 guests