G'day all. i am lookin at gettin a gu 4.8 and want to fit 36s to it. Now i have heard alot of different stories on what suspension to fit to fit 36s. i've heard u can do it with 3 inch and i have been told you need 5 inch minimum.
Can anyone shed some more light on this topic. cheers
Dan
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
36s to a GU
been covered heaps but here is what i have done!!
with 36s and bigger you will most likely always get rubbing somewere on the guards even if lifted 5"! this is just sllight rubbing and will not cause damage!
Now i ran 36s on my standard height GU for 6 months and it rubbed on full flex at the rear and on full steering lock it rubbed on back of front mud flap/guard! No issue thou! only problem is that when the rear bounced hard when 4wding, that it rubbed also because there wasnt much clearance!
I have then fitted a 7" lift and still get rubbing in rear on full flex! the front has cleared and only rubs if turning and flexing up at same time, still no damage!
with your bus i would think that you would be very happey with 3" lift and 36s! it would drive well and still get along way! if you start going much more lift that 3" then it does have a few other issues and you are more likely to suffer on road drivability!
with 36s and bigger you will most likely always get rubbing somewere on the guards even if lifted 5"! this is just sllight rubbing and will not cause damage!
Now i ran 36s on my standard height GU for 6 months and it rubbed on full flex at the rear and on full steering lock it rubbed on back of front mud flap/guard! No issue thou! only problem is that when the rear bounced hard when 4wding, that it rubbed also because there wasnt much clearance!
I have then fitted a 7" lift and still get rubbing in rear on full flex! the front has cleared and only rubs if turning and flexing up at same time, still no damage!
with your bus i would think that you would be very happey with 3" lift and 36s! it would drive well and still get along way! if you start going much more lift that 3" then it does have a few other issues and you are more likely to suffer on road drivability!
4-5 inch Lift.
36 ET2s and not the original rims that are pictured. I changed them to after maket ROH with Toyota offset.
the Gu rims rubbed bad in the rear guards and the front steering lock bolts needed to be wound out and replaced with longer bolts to stop the lugs on the tyres fouling on th radius arms.
Steering lock was undrivable.
Grant
36 ET2s and not the original rims that are pictured. I changed them to after maket ROH with Toyota offset.
the Gu rims rubbed bad in the rear guards and the front steering lock bolts needed to be wound out and replaced with longer bolts to stop the lugs on the tyres fouling on th radius arms.
Steering lock was undrivable.
Grant
Last edited by GUEEY on Sun Jul 13, 2008 9:19 pm, edited 1 time in total.
GU III TD42T UFI18G Cross Country IC, 20 PSI. Neeeeeed mooooore Fueeeeeel.
My lift drives perfect.4wd_Haggis wrote:cool thanks guys.
i was more thinkin 4 inch that should be enough and not makin it to top heavy.
with such a lift wot steerin components should be changed too.
cheers
Drop boxes ( Fixes Castor )
Adjustable Panhard rod ( Re alines diffs )
Adjustable Drag link ( Re alines Steering wheel after adjusting panhard rods)
Extended rear brake line, swap old rear on to front.
Stronger Rear Trailing Arms (Optional but advised)
Grant.
GU III TD42T UFI18G Cross Country IC, 20 PSI. Neeeeeed mooooore Fueeeeeel.
hey cum bucket hows it going4wd_Haggis wrote:cool thanks guys.
i was more thinkin 4 inch that should be enough and not makin it to top heavy.
with such a lift wot steerin components should be changed too.
cheers
segan1 on here runs 37's on 4"
1993 Gq lwb with added xtra's :) sold
fj60,lifted,35s,33s for daily, 3f power!
fj60,lifted,35s,33s for daily, 3f power!
sweet as mate thanks for the info. once i get the gu and the lift i'll put it up and let you all know how it goes.GUEEY wrote:My lift drives perfect.4wd_Haggis wrote:cool thanks guys.
i was more thinkin 4 inch that should be enough and not makin it to top heavy.
with such a lift wot steerin components should be changed too.
cheers
Drop boxes ( Fixes Castor )
Adjustable Panhard rod ( Re alines diffs )
Adjustable Drag link ( Re alines Steering wheel after adjusting panhard rods)
Extended rear brake line, swap old rear on to front.
Stronger Rear Trailing Arms (Optional but advised)
Grant.
Who is online
Users browsing this forum: No registered users and 128 guests