Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GU 2.8 hot start

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 3
Joined: Sun Jul 22, 2007 4:28 pm
Location: Geelong

GU 2.8 hot start

Post by rustyrusty »

I know this has been covered before but can not find can someone help with this.
Starts cold first time, but hot will not start, to get it started have to cool the injector pump down with water. What was the fix and how much.

Thank
Top
Posts: 252
Joined: Fri Sep 02, 2005 3:45 pm
Location: outside your window

Post by hiy6o »

Mate get along to your nissan dealer and ask for this :- 09621-80901AU & 16826-V0700 This is a plate and o'ring . The problem is in the pump start piston area , this plate is a Nissan fix part to push the start piston to a fresh part of the bore . The plate is located on the drivers side of the pump and is eaisly accessed . Simply fit the plate and o'ring , keep the old plate as it would need to be refitted to check the pump timing . This will usually only last about 60>80000 km then you will need a new pump housing and rebuild . :cry: :cry:
Nissan came up with this to get them out of warranty before they died. :bad-words: :bad-words:
Nup not telling
you'll have to find out yourself
Top
Posts: 3
Joined: Sun Jul 22, 2007 4:28 pm
Location: Geelong

Post by rustyrusty »

Thanks for this Hiy60 it will help alot
Top
Posts: 195
Joined: Sun Apr 20, 2008 10:10 pm
Location: sunshine coast

injector pump

Post by patrol28 »

if you rebuild the pump now instead of letting it wear out its just a kit and not a new housing alot cheaper mine was $800 instead of the $1500-$1800 for a full rebuild ..

ask around and fine a good injector pump place it pays to ask a few differance place who they'd get to do it ..
https://www.suspensionstuff.com.au/shop/product_info.php?cPath=137_40_69&products_id=996
Top
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

Post by matto »

get the nissan o ring kit and then sell it while it works its only a matter of time. kits are about $100
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Top
Posts: 286
Joined: Tue May 11, 2004 8:48 pm
Location: Toowoomba

Post by patrol man »

A good diesel shop will sell you the same part a lot cheaper, the fault is with the pump housing and this plate is a mask type affect, the only real solution is to replace the worn pump housing, cheer Phill.
Living the dream on the hill that floods
Top
Posts: 252
Joined: Fri Sep 02, 2005 3:45 pm
Location: outside your window

Post by hiy6o »

The genuine part only costs $35.00 so why stuff around .
Nup not telling
you'll have to find out yourself
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests