Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Bottom rad hose on GQ V8 Question

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 70
Joined: Sun Jul 31, 2005 5:54 pm
Location: gold coast

Bottom rad hose on GQ V8 Question

Post by smurf »

Hi guys ,done my V8 conversion in my GQ, up and running sweet :D ,but I'm not happy with the bottom rad hose,joined two together to make longer one,but was wondering if anyone else who has done this conversion how they did their hose,is there one loner one that suits or do I still leave it joined,just a bit worried it might come apart thats all.Oh and its a 304 too.Thanks

cheers mick
White SWB MAV Diesel , 2" lift, 33"tyres
&
'99 Hilux Xtra Cab, 3Lt Diesel, Turboed, 2"lift
Posts: 286
Joined: Tue May 11, 2004 8:48 pm
Location: Toowoomba

Post by patrol man »

Check out the F100 V8 hose, I have used these in the past,
I run chev hoses on mine, but I think the hoses are on the other side, cheers Phill
Living the dream on the hill that floods
Posts: 70
Joined: Sun Jul 31, 2005 5:54 pm
Location: gold coast

Post by smurf »

Thanks Phill , I'll check it out.
White SWB MAV Diesel , 2" lift, 33"tyres
&
'99 Hilux Xtra Cab, 3Lt Diesel, Turboed, 2"lift
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Post by PGS 4WD »

Take the one you made down to the auto part supplier and go through the bins to see if there is something similar.

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Posts: 396
Joined: Wed Dec 17, 2003 3:34 pm
Location: South Side Brisbane

Post by Draven »

I had the bottom outlet on the rad changed to 'straight out' , after that a stock holden V8 rad pipe fits great.
I do Web Hosting!
Http://www.ingenuity.net.au

Check out my 4x4 blog!
http://www.monster4x4.com.au/
Posts: 70
Joined: Sun Jul 31, 2005 5:54 pm
Location: gold coast

Post by smurf »

The only problem is my rad's an alloy one with plastic tanks so can't extend the pipe and tried looking at the parts supplier but nothing so far,did go past the rad guy and he's making me a joiner piece to suit the 2 different size hoses so it should hopefuly fix the prob a bit better
White SWB MAV Diesel , 2" lift, 33"tyres
&
'99 Hilux Xtra Cab, 3Lt Diesel, Turboed, 2"lift
Posts: 43
Joined: Tue Sep 04, 2007 1:05 pm
Location: w'bool

Post by 5lt Patrol »

Im making up a s/s pipe and just using a small section of rubber hose at each end.
Posts: 574
Joined: Wed Aug 17, 2005 11:49 am
Location: NZ

Post by nzdarin »

I did the same. Make steel pipes and just used short sections on rubber. Not a Holden motor but the same problems.
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
Post Reply

Who is online

Users browsing this forum: No registered users and 30 guests