Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

titan solenoids

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 123
Joined: Thu Apr 03, 2008 11:23 am
Location: mooroolbark Victoria

titan solenoids

Post by tigerz11 »

Ramsey REP8000 whinch. It has only 2 wires connected to the winch motor unlike allot of whinches that have 3. Can these solenoids still be used on these motors??
Top
Posts: 613
Joined: Fri Oct 21, 2005 9:33 pm
Location: virginia, brisbane

Post by ausoops »

no, there are not enough contacts to change the polarity.
swb safari
Top
Posts: 123
Joined: Thu Apr 03, 2008 11:23 am
Location: mooroolbark Victoria

Post by tigerz11 »

many thanks
Top
Posts: 89
Joined: Sat Dec 10, 2005 10:26 pm
Location: North Qld

Post by jcclures »

What about the solenoid that you have in the picture with you 3500lb winch, the motor on that winch appears to have only 2 wires to connect to it.
1986 Nissan MK Deluxe, 1uzfe quad cam V8, Bull bar, Thomas Winch
Super Oscar Spotlights, Sliders with Body lift, And Long-range Fuel Tanks.
Top
Posts: 123
Joined: Thu Apr 03, 2008 11:23 am
Location: mooroolbark Victoria

Post by tigerz11 »

ausoops wrote:no, there are not enough contacts to change the polarity.
we had sold one of our solenoids to a bloke who had only 2 terminals on his 12v winch motor i had said it wouldnt work he told me it can ,and he has succeeded a pic of his wiring diagram is below ,may help others for the future

Image
Top
Posts: 845
Joined: Sun Dec 17, 2006 8:28 pm
Location: Bairnsdale, East Gippsland

Post by jet-6 »

Ok, Paul has sent me out one of his solenoids, and i have ripped it apart and inspected its layout, and after chucking it on the bench and testing it to do the above(2 wire winch) and the standard 3 wire set up both work well

So this soleniod will do both types of winches with no issues, the above picture is correct to use

Matt
Top
Posts: 613
Joined: Fri Oct 21, 2005 9:33 pm
Location: virginia, brisbane

Post by ausoops »

sorry, i made a mistake
swb safari
Top
Posts: 89
Joined: Mon Jun 05, 2006 9:26 am
Location: Sutherland Shire NSW

Re: titan solenoids

Post by GQSWB42td »

hi i just brought on of these soleniods to run an 9.5xp warn winch. Im haveing troubles with the wiring side. i followed the instruction that came with it and now as soon as you get battery positive the winch spools out. would someone be able to tell me where i am going wrong.
Thanks
building
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 7 guests