going to install some reductions gears,
wondering if its best to replace and seal inparticular?
also are GQ and GU transfers the same (seal wise) as i have been through the bible and found the part numbers for the input,rear outpul and front output (are they are the only seals i need?), but i cant be sure if they are GQ or GU.
cheers
steve
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
transfer seals
transfer seals
89 4.2tdt pootrol,w-a,3inch spring,bar-reparing,83%ers,4.6, arb front & noslip rear, 35's
tree mended guards
tree mended guards
Not sure about the seals being the same.....i would think they are ,because the box is the same and the reduction gear sets are the same (shaft diameter etc). I had a Gq T/Case as a spare when i put rock hoppers in my Gu and the only difference i could find with both boxes was the 4wd selector shaft on the side.
Who is online
Users browsing this forum: No registered users and 0 guests