Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60 series rear disc conversion about to get under way.....

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 438
Joined: Tue Feb 20, 2007 7:34 am
Location: Gordonvale Queensland

Contact:
Contact flyology

60 series rear disc conversion about to get under way.....

Post by flyology »

Ok, I am about to start the rear disc conversion on my HJ61.

I am using Subaru calipers (the ones to suit the 18mm wide vented discs) GQ rear discs mounted over 80 series rear hubs. (I have an axle widening kit fitted to the front, running IFS lux hubs)

I am after the spacing between the inside of the disc and the mount for the caliper. Anyone got a Subaru Brumby??

http://www.outerlimits4x4.com/ftopic147207.php

the rest of the braking system includes forunner 45mm piston front calipers, and 80 series booster and master cylinder, and an adjustable proportioning valve.

will post picks of the brackets I have water cut (last year..) and other bits soon...

MB
Top
Posts: 89
Joined: Sun Dec 10, 2006 6:42 pm
Location: Sydney, NSW

Post by MYTANK »

Sounds like you've got it almost all worked out :)

Keep us updated with pics if you can ?

Cheers,

Dan
________
0/________\0
|O|------|O|
[]----o----[]
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests