Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Stumped....

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 82
Joined: Thu Jul 05, 2007 8:18 pm
Location: QLD

Stumped....

Post by McGyver »

hi all, at the moment i have small problem with my 95 sierra, when on flat hard ground like concrete in shed or bitchumen if i let the clutch out in low 4 NOT in gear it creeps forward, the problem is there in 4 high and 2 you can feel it trying but it only moves in low 4 because of the gearing i am guessing.

it has me stuffed because if the gearbox is in neutral how is it still trying to drive forward...... extreem exhaust propulsion? lol

cheers
GQ Patrol wagon, petrol, boat towing vehicle
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

perfectly normal, don't stress about it.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Posts: 82
Joined: Thu Jul 05, 2007 8:18 pm
Location: QLD

Post by McGyver »

oh ok fair enough, is there a reason that is easy enough to explain?
GQ Patrol wagon, petrol, boat towing vehicle
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

with the car in neutral the shafts can still spin slightly, this is turn can make the car creep forward a little. known many a zook to do it but its never been a problem.
Last edited by joeblow on Wed Jul 23, 2008 7:32 pm, edited 1 time in total.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Posts: 443
Joined: Tue Oct 12, 2004 10:45 am
Location: Sailsbury-Brisbania

Post by JrZook »

joeblow wrote:not realy. without seeing it its just guesswork. to break a piston you must engage the diff while both wheels are doing different speeds, even then there has to be alot of force. if its not the above than it will be an install problem.
:?

Have you had the gearbox overhauled rescently at all? I had mine done and it was very very tight, in neutral it would creep. Im thinking a bearing wasnt pressed on all the way home on the main shaft, binding the synchos up or something.

What oil are use using in your box?

Dan
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

JrZook wrote:
joeblow wrote:not realy. without seeing it its just guesswork. to break a piston you must engage the diff while both wheels are doing different speeds, even then there has to be alot of force. if its not the above than it will be an install problem.
:?
woops...wrong post...
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Posts: 82
Joined: Thu Jul 05, 2007 8:18 pm
Location: QLD

Post by McGyver »

no gearbox work, i did upgrade my clutch resently, but only started noticing the creeping after the crawler gears went in. cant remember the oil used sorry.
GQ Patrol wagon, petrol, boat towing vehicle
User avatar
NIK
Posts: 974
Joined: Wed Aug 13, 2003 12:13 pm
Location: Newcastle

Post by NIK »

Ive always had that problemand didnt know what it was until there was a thread on here recently that talked about oils and when its cold it thickens and with the shafts spinning inside the gearbox it "creeps" forward.
The other morning it was bloody cold (jumper, jacket, beanie, gloves is the heater on!!) and I drove my zuk a few metres down the driveway in neutral.
So dont worry its normal for it to do it when its cold.
Nik
Posts: 918
Joined: Sun Aug 20, 2006 11:46 am
Location: Western Brisbane

Post by Highway-Star »

McGyver wrote:no gearbox work, i did upgrade my clutch resently, but only started noticing the creeping after the crawler gears went in. cant remember the oil used sorry.
Exact same thing happened to me. I have 4.9 T/C gears. I always park my car in 1st Low because the handbrake is crap. I've done allot of late nights at work lately and at about 2am when I finish (Its freezing cold) the car moves forward when in neutral low.

Its just happening because the oil in the gearbox is slowly turning the gearbox output, and because the transfer gears are quite low now it can actually move the car. Since my handbrake is crap it overcome this and moves the car (only a little though before the handbrake catches up).

Just be aware it does it, and dont let the clucth out in Low unless you want to move.
Wheeling on completely wicked angles, without even looking stable.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest