Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

mission impossible

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

mission impossible

Post by Hoonz »

my front passanger side diff seals blew and I've pulled it all apart cleaned it repaced / and repacked all the bearings myself and put it all back together .... first time I've ever done it ...
after putting it back together I found a washer on the floor of copper/brass colour with the inside edge angled I can't remember taking it out .. can some one help me out? :( :?: :shocked!:
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Could be wrong but that sounds like a Brass washer from one of the Brake line fittings. Does the Brake line on a patrol caliper have a bolt going through it instead of the line screwing directly into the caliper?
Top
Posts: 2388
Joined: Sun Nov 24, 2002 10:20 pm
Location: bacabugari

Contact:
Contact big red

Post by big red »

whats the size of it, what year is yours. :?:
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
Top
Posts: 1361
Joined: Thu Oct 24, 2002 8:47 pm
Location: Now in a happy place.

Post by Cheezy4x4 »

If its a large one, around 50 to 60mm in diameter and 5mm thick its the CV spacer ring. :shock: :oops:
NOW ABLE TOO SAY WHAT I WANT WITHOUT FEAR OF LOOSING SALES.
The person who says it cannot be done should not interrupt the person doing it.
Top
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

yeah its about 50-60mm diameter and 5mm thick

CV spacer?? where exactally does it go?
Top
Posts: 543
Joined: Fri Nov 08, 2002 9:40 pm
Location: Hicksville, Cent Vic...No the other one!

Post by Juzza »

On the CV shaft with the tapered side facing th cv bell.
Pull it apart again. :oops: :cry: :(
Custom Barwork
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
Top
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

DOH!!!!!!!!!!! :microwave:
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Good practice...

you should time it this time to see how long it takes... :D
Top
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

didn't take me long at all .. 20mins max tyre back on
but then again I got airtools at home here
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest