does anyone have any info on a 2l vitara swap for the sierra i have found a little bit of info but i dont know who does it or how much it would cost
i think the site i looked at was american
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
2L vitara into sierra has it been done in australia
why bother, u can work a 1600efi to above 200hp, more than ud want for a sierra, talk to the boys at suzisport as they are into racing gti switf and are getting this hp from the 1300's. check out if u can get an engineers cert first it u really want a 2.0 in there.
1993 LWB vitara, Front & Rear alloy bars, towbar, spotties, UHF.
do this to the G16bgumtree wrote:why bother, u can work a 1600efi to above 200hp, more than ud want for a sierra, talk to the boys at suzisport as they are into racing gti switf and are getting this hp from the 1300's. check out if u can get an engineers cert first it u really want a 2.0 in there.
I am thinking of it
http://www.pirate4x4.com/forum/showthread.php?t=701496
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Speak to WRXZook and watch this http://www.youtube.com/watch?v=W29HHXaH ... 34&index=0
Mooney Yee Haa
Go Off like a Frog in a SOCK!
I didnt do it! - Bart
Go Off like a Frog in a SOCK!
I didnt do it! - Bart
More torque and more power from a motor in stock configuration...gumtree wrote:why bother, u can work a 1600efi to above 200hp, more than ud want for a sierra, talk to the boys at suzisport as they are into racing gti switf and are getting this hp from the 1300's. check out if u can get an engineers cert first it u really want a 2.0 in there.
I reckon if you can fit the J20A motor in there, it would be greatly preferable to a worked 1600.
DMA Founding Member #1 - Now Retired
X2
I couldn't imagine trying to drive a 1.6 with 200HP off road N/A, or trying to hold that motor together in an off road car (high load, low speed)
Having said that, the J20 isn't a good fit IMHO.
Steve.
I couldn't imagine trying to drive a 1.6 with 200HP off road N/A, or trying to hold that motor together in an off road car (high load, low speed)
Having said that, the J20 isn't a good fit IMHO.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
depending what state your in you should be able to engineer the 2 litre with no dramas. seen one in a maruti, had to be bodylifted. ran the radiator from the 2 litre and used the bellhousing with and early five speed vitara box. came up good and went well.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Who is online
Users browsing this forum: No registered users and 0 guests