Hi,
Have some questions, hopefully you can offer some advice, I purchased an 86 model kingcab navara at the start of the year with the plans of doing it up. Have only briefly spoken to an engineer about what I want to do, the first step was a sas up front...now the current navara transfer has driveshaft on passenger side, the patrol diff (using mq diff) has diff on drivers side, so been trying to work that out (flipping diff, etc) just recently started thinking bout the engine, wasn't planning on keeping z24 as they are crap, easiest conversion I can think of is the commodore v6 and wanting an auto...I know marks adaptors and similar companies sell transfer adaptors to suit navara, but what are your thoughts on using a different transfer case with front output on drivers side (won't have to play with diff then), thoughts on which one, would a gq work or maybe hilux??? Just have to pick one that I can also adapt to auto box...
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Transfer case question.
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Re: Transfer case question.
what do you want it for in the end?
$5-10k of mods, with engineering you could buy a lux or GQ for that coin.
$5-10k of mods, with engineering you could buy a lux or GQ for that coin.
Who is online
Users browsing this forum: No registered users and 2 guests