Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Loud bang under load in low range GQ

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 15
Joined: Thu Feb 21, 2008 12:45 pm
Location: Adelaide

Loud bang under load in low range GQ

Post by JJ42 »

My GQ when in 4x4 under load has a intermitent bang from the drive line and seams to loose drive for a plit second. I thought at first it may be a hub problem, i have since pulled the hubs off and there is no visible wear on any of the teeth surfaces. I have changed both front & rear diffs along with reco tailshafts the problem has followed?
Top
Posts: 257
Joined: Fri Jun 20, 2008 4:00 pm
Location: Far North QLD

Post by steve patrol »

:? Have you checked the CV's? Also transfer case??
Top
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Contact:
Contact jessie928

Re: Loud bang under load in low range GQ

Post by jessie928 »

JJ42 wrote:My GQ when in 4x4 under load has a intermitent bang from the drive line and seams to loose drive for a plit second. I thought at first it may be a hub problem, i have since pulled the hubs off and there is no visible wear on any of the teeth surfaces. I have changed both front & rear diffs along with reco tailshafts the problem has followed?
have you got auto hubs?


Jes
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Top
Posts: 15
Joined: Thu Feb 21, 2008 12:45 pm
Location: Adelaide

Post by JJ42 »

I dont understand how cv's can slip, i have been leaning towards the transfer case lt could be missing a couple of teeth..
Top
Posts: 15
Joined: Thu Feb 21, 2008 12:45 pm
Location: Adelaide

Post by JJ42 »

na manual hubs, has autos they are a pain in the ass.
Top
Posts: 312
Joined: Sat Feb 08, 2003 12:49 pm
Location: Esperance WA, currently travelling around OZ

Post by GQ Toy »

Check the transfer case, the chain in mine was streched and would slip and make a nice noise like that. Replaced for $700
Top
Posts: 257
Joined: Fri Jun 20, 2008 4:00 pm
Location: Far North QLD

Post by steve patrol »

JJ42
Posted: Thu Jul 31, 2008 11:07 am

--------------------------------------------------------------------------------

I dont understand how cv's can slip...
Shredded splines on the shaft... :roll:

... thats if youve been having too much fun...
Top
Posts: 15
Joined: Thu Feb 21, 2008 12:45 pm
Location: Adelaide

Post by JJ42 »

Yea ok , i checked all that out when i chenged the diff centres to 4:3s .
Top
Posts: 15
Joined: Thu Feb 21, 2008 12:45 pm
Location: Adelaide

Post by JJ42 »

How much is invoved in changing the transfer case....
Top
Posts: 184
Joined: Tue May 27, 2003 7:33 pm
Location: Endeavour Hills, Melb, Aust

Post by Red_MAv »

Sounds just like mine did. Follow this post for my outcome and costs.
http://www.outerlimits4x4.com/ftopic121 ... ight=clunk
Top
Posts: 574
Joined: Wed Aug 17, 2005 11:49 am
Location: NZ

Post by nzdarin »

I had the same problem but I would loose drive to front wheels when under heavy load. second hand t-case (free) and the problem is solved.
It would appear that this is relativly common!
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
Top
Posts: 15
Joined: Thu Feb 21, 2008 12:45 pm
Location: Adelaide

Post by JJ42 »

im gona pic up a new transfer case tonight and swap it ova and see if that helps, i think it will.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 106 guests