Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

roll cage question

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 77
Joined: Tue Jan 22, 2008 6:09 pm
Location: Newcastle

roll cage question

Post by suzukigav »

Currently in the process of building a roll cage for my sierra, have built and installed the main roll bar behind the seats, It is only bolted to the wheel arches by a plate on top of the wheel arch and a plate underneath in the wheel arch...
it seems pretty strong. There are going to be 2 bars connected to the top corners of the main roll bar that will travel back towards the tail gate... I could just bolt these to the shell also but i'm wondering if it's worth the effort cutting holes and bolting them to the chassis?

Any ideas?
Top
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

Bolt to the body, under no circumstance bolt the front to one compnent and the rear to another ie body and chassis. In an accident things could get very messy.
;)
Top
Posts: 1213
Joined: Wed Oct 26, 2005 8:25 pm
Location: SE Melbourne

Post by dank »

http://www.ccda4wd.com.au/ These guys have some specs and info you can download off the web on the front page. Gives a good guide on "comp spec" cages, and you can apply that info to a recreational cage.
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Top
Posts: 145
Joined: Mon Jul 23, 2007 9:54 pm
Location: perth WA

Post by lexplay »

yea just go to the body with plates both sides.
pics would be good i want to build mine soon.
Top
Posts: 335
Joined: Sat Aug 05, 2006 11:21 pm
Location: Sunshine Coast

Post by Taff »

AFAIK if it is going to be mod plated and legal it cant be bolted to the chassis

Not 100% sure on that, but my 6 point is plated and bolted to body with plates.
Top
Posts: 1663
Joined: Mon Nov 04, 2002 6:38 pm
Location: bethania QLD

Post by oozuk »

If you intrested have a look at my buildup thread, i took heaps of photo's of my roll cage install, it might be helpful for you ;)
Trying to finish the Zook

OOZUK buildup
http://www.outerlimits4x4.com/viewtopic.php?t=80949
***KING OF BLING***
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 2 guests