Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Car respray

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 59
Joined: Thu May 06, 2004 4:38 pm
Location: Melbourne

Car respray

Post by GQboy »

Does anyone know who can respray my GQ shorty in the Brissy area, I am just after a straight white coat as the ol girl is starting to look a touch shabby. I am not after a sho finish , just a oce over to neaten her up
There are two infinates in life , The universe and Patrols!
Top
Posts: 216
Joined: Sat May 17, 2008 11:46 pm
Location: Melton Sth, vic

Post by dklyne454 »

It may be cheaper to buy a gun and do it yourself. If you are not worried about getting a show finish, then you also get the satisfaction of saying that you did it.

White is probably the easiest and most forgiving colors to paint. grab a piece of tin or scrap metal or something to practice on and give it a go. it's not rocket science. And the more you do the better you get.

set your compressor at 60-65 psi, Hold the gun about 20-30cm away from the vehicle, and spray even coats. not too fast so it is thin and sandy, but not too slow, otherwise it will run.

You are probably looking about 200-300 all up for materials, and a day to do it.

HAve fun :lol:
92' Mav. seat covers, air freshner, floor mats, half eaten sandwich..........
http://www.outerlimits4x4.com/ftopic147700.php
Top
Posts: 194
Joined: Tue Oct 14, 2003 8:26 pm
Location: brisbane

Post by daveo »

anybody have a rough cost to do a basic respray? im in the same position as GQboy, the lux could do with a tidy up. im not really in the position with time, equip etc to do it myself.
Top
Posts: 766
Joined: Mon Dec 30, 2002 3:08 pm
Location: Melbourne

Post by jtraf »

half decent paint and supplies $300 or there abouts

cheap gun and compressor $200

Lots of time in the prep and you will get a good finish.......
Top
Posts: 147
Joined: Sat Aug 04, 2007 1:28 pm
Location: Sydney

Post by little rusty »

Ive done a small amount of painting on my cruiser before and it was quite easy but I had issues with the hardening of it. When I bolted it all together it broke the paint layer or it scratched easily... anyone got any advice on how to achieve this? Is there a hardener compound that needs to be added to the paint or just a longer curing process?

Sorry for the hyjack.
Top
Posts: 216
Joined: Sat May 17, 2008 11:46 pm
Location: Melton Sth, vic

Post by dklyne454 »

Not sure about hardner for acrylic, but yes there is a hardner that must be added when spraying 2 pack to allow for the curing.
92' Mav. seat covers, air freshner, floor mats, half eaten sandwich..........
http://www.outerlimits4x4.com/ftopic147700.php
Top
Posts: 126
Joined: Sun Jul 20, 2008 6:57 pm
Location: Frankston

Post by SWBMQCraig »

Hey mate i just did a bit of touching up on my patrol just with one of those spray cans from autobarn, paint matched up really well! Did some big flaking areas too.. paint, wax and grease remover, etching primer and some wet and dry sandpaper only set me back $50!

1 can of paint would prob almost cover a bonnet.

Hope this helps!
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest