Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

3L Hilux idler pulley rubbing

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 7
Joined: Fri Jan 11, 2008 10:18 pm
Location: Brisbane

3L Hilux idler pulley rubbing

Post by toddo »

I have a 97 Hilux, 2.8 Litre diesel. Have just put on a turbo and then had the clutch replaced. The idler pulley of the air-con belt is now rubbing on the high pressure power steering line at the front drivers side of the engine. It has almost worn through, but seems to be holding for now. At rest, the pulley is about 10-15mm behind the pipe, so it only rubs while running / driving. The engine mounts look fine, the air-con compressor mounts are not loose, I tightened the 15mm nut on the idler pulley - it seemed a bit loose but it's still happening. Could it be the extra torque from the turbo twisting the engine over and forward? Took it back to both turbo and clutch shops - of course it's neither of their faults. Does anyone have any ideas?
Top
Posts: 73
Joined: Thu Apr 17, 2008 2:36 am
Location: townsville

Post by Man of Cheese »

tighten fan belt or reroute p/s hose. but defenitly replace hose
who would win between a grilled cheese sandwich and a taco?
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 4 guests