Having trouble starting my hj 60, its like it's getting no fuel, kicks over and wants to start but doesn't get that final kick, pulled the lines off to the injecters and turned the engine over but nothing, checked the filters all good and clean. It all started from last weekend, was running good then when i started climbing a step was running good till i got to the top, started running shit then stalled and wouldn't start just turned over and over, but seems to be no fuel coming up.
ANY IDEAS PLEASE
Chris
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
fuel problems 60 series
Moderators: toaddog, Elmo, DUDELUX
fuel problems 60 series
turbo 60 series,soon to be locked
go the 40
[url]http://www.allaussie4x4.com/forum[/url]
go the 40
[url]http://www.allaussie4x4.com/forum[/url]
Thanks mate, yep sure enough sounds like air has been sucked in and the primer pump is stuffed, Will buy a new one on Tuesday and that should fix it, hopefully that's the only issue.joel HJ60 wrote:Sounds like your sucking air in the fuel lines somewhere. By climbing that hill, it may have exposed that leak further and allowed more and more air to be sucked in.
Might be your lift pump.
Are you sure it's bled properly?
Cheers
Chris
turbo 60 series,soon to be locked
go the 40
[url]http://www.allaussie4x4.com/forum[/url]
go the 40
[url]http://www.allaussie4x4.com/forum[/url]
Does it look something like a filter?mr304 wrote:hey mate i had a similar prob with my 12ht mid way under the car is a water trap and they usally never get checked check that mine was full of slime and junk hope this helps
turbo 60 series,soon to be locked
go the 40
[url]http://www.allaussie4x4.com/forum[/url]
go the 40
[url]http://www.allaussie4x4.com/forum[/url]
Yeah mate its about half way along the inside of the chassis on the drivers side. It should be black and looks like a cannister. Bit smaller than a can. It has a 10mm bolt in the bottom. Undo this bolt and water first should run out, then fuel. I've heard these thing are prone to shit themselves.
[b]1985 HJ60[/b]
[url]http://forum.ih8mud.com/60-series-wagons[/url]
[url]http://forum.ih8mud.com/60-series-wagons[/url]
When you say the primer pump wont pump, does it go up and down or is it just staying up?
Maybe a blocked fuel line, possibly sucked up some crap when you went up the hill?
See if you can gently blow some compressed air down the fuel line and then see if the lift pump works... Use the bleed nipple on the fuel filter housing to bleed it off....
Maybe a blocked fuel line, possibly sucked up some crap when you went up the hill?
See if you can gently blow some compressed air down the fuel line and then see if the lift pump works... Use the bleed nipple on the fuel filter housing to bleed it off....
wont move at all just unlocks and locks back up wont pump and i got the compresser out and blew air thru the lines was not blckedflyology wrote:When you say the primer pump wont pump, does it go up and down or is it just staying up?
Maybe a blocked fuel line, possibly sucked up some crap when you went up the hill?
See if you can gently blow some compressed air down the fuel line and then see if the lift pump works... Use the bleed nipple on the fuel filter housing to bleed it off....
turbo 60 series,soon to be locked
go the 40
[url]http://www.allaussie4x4.com/forum[/url]
go the 40
[url]http://www.allaussie4x4.com/forum[/url]
undone that bolt just fuel came out and some dirt main filter was clean but going to put new main filter back onjoel HJ60 wrote:Yeah mate its about half way along the inside of the chassis on the drivers side. It should be black and looks like a cannister. Bit smaller than a can. It has a 10mm bolt in the bottom. Undo this bolt and water first should run out, then fuel. I've heard these thing are prone to shit themselves.
turbo 60 series,soon to be locked
go the 40
[url]http://www.allaussie4x4.com/forum[/url]
go the 40
[url]http://www.allaussie4x4.com/forum[/url]
Who is online
Users browsing this forum: No registered users and 36 guests