Hey,
Anyone know if the 96 AUTO G16B dizzy motor ecu is compatible to the vit G16b AUTO motor ecu?
more so as a spare ecu as well as i noticed on red book there is about a 3-4kw and nm increase as well as a 6000rpm revlimit on the baleno compared to the vit one. (5600rpm rev).
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Baleno vs Vitara G16B ecu
Baleno vs Vitara G16B ecu
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
cheers for the info, i am grabbing that also.11_evl wrote:i have both dissys, the vit one is a 4 or 5 pin plug where as the bal one is a 2 wire plug
this was about the ecu as the baleno also came out in the coil pack model in regards to the dizzy.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
nic, came across info to the effec that by 96 your baleno ecu is prob. OBDII spec. Id reakon that would mean no go on the swap to a pre-96 vit motor.
http://www.obd-ii.de/tech_com-uebe.html
On another topic it look like a couple of guys in suzuki-forums.com have almost cracked the early90's vit OBDI output ito something that will be readable on a PC. I'm watching it with great interest and prepared to pay for one if they get it running. Check it out
http://www.suzuki-forums.com/suzuki-sid ... ces-9.html
http://www.obd-ii.de/tech_com-uebe.html
On another topic it look like a couple of guys in suzuki-forums.com have almost cracked the early90's vit OBDI output ito something that will be readable on a PC. I'm watching it with great interest and prepared to pay for one if they get it running. Check it out
http://www.suzuki-forums.com/suzuki-sid ... ces-9.html
hmmmm i am getting all the sensors and all that too. have to see once its out i think. i will talk to the boys down at suzuki also and see what the parts manuals say about the odb2 and that. i am hoping i can swap it all over than can do scan toolyPCRman wrote:nic, came across info to the effec that by 96 your baleno ecu is prob. OBDII spec. Id reakon that would mean no go on the swap to a pre-96 vit motor.
http://www.obd-ii.de/tech_com-uebe.html
On another topic it look like a couple of guys in suzuki-forums.com have almost cracked the early90's vit OBDI output ito something that will be readable on a PC. I'm watching it with great interest and prepared to pay for one if they get it running. Check it out
http://www.suzuki-forums.com/suzuki-sid ... ces-9.html
thats presuming all the sensors can bolt in easy and its only the ecu thats differrent in it self
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Who is online
Users browsing this forum: No registered users and 3 guests