Question to those out there running upgraded sierra axles.
Has anyone broken one in regular trail use? Particularly a front?
Looking at upgrade options now and concerned about front breakages as unless I buy a spare set a repair becomes a bigger issue.
I don't tend to regularly bust a lot of standard parts on 31s but looking to upsize to probably a 34in swamper (tall and narrow anyway). Finding a 31 is too small for a couple of particular rock steps I regularly drive and need a bit more tyre. Drive very little mud, mainly rocky trails etc, not pure rock as such. Further info that may help, WT, 1.3L, 6.5s, currently lockright F & R, prob going to go mini-spool rear, LR front.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
DoubleTough/Chromo etc breakages
DoubleTough/Chromo etc breakages
-Mal
Zook 1, 2, 3 gone
Patrol - Wheels, engine and stuff
Zook 1, 2, 3 gone
Patrol - Wheels, engine and stuff
is it me or does that just not sound right?!? going to make turning a right bitch.....alien wrote:perhaps rear axles up front is a cheaper option given you're not breaking stuff now?
[quote="-Nemesis-"][quote="bj on roids"]whens the aussie one start?[/quote]
A few episodes before they can it? :lol:[/quote]
A few episodes before they can it? :lol:[/quote]
Calmini make the cheapest aftermarket axles I think, in 26 spline like the rear, they woudln't be the strongest and don't come with CV's but may be right for what you want. I think alot of the victorian guys run the same 34's as you're looking at on stock axles but in low traction muddy trails not rock.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
I'd be surprised if you manage to break doubletoughs. We've had no trouble with them running 34/35" tyres, and there was a thread recently on Pirate with a guy running 36's and pulling burns etc on rock and he's had no trouble either.
I have no experience with clamini cromo rear axles, but it seems that on high traction surfaces with stock stuff you need to know when to get off the throttle if it starts to bounce, axles and rear diff can be marginal.
Just make sure your swampers can't grab anything on the chassis/body. If the tyres grab the car, it's much easier to break somehthing - I've broken 2 cv's this way.
Steve.
I have no experience with clamini cromo rear axles, but it seems that on high traction surfaces with stock stuff you need to know when to get off the throttle if it starts to bounce, axles and rear diff can be marginal.
Just make sure your swampers can't grab anything on the chassis/body. If the tyres grab the car, it's much easier to break somehthing - I've broken 2 cv's this way.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 7 guests