Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

5 link Vs. ???

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 222
Joined: Sun Jun 29, 2008 5:21 pm
Location: Dubbo

5 link Vs. ???

Post by 4X4 shorty »

Yeah I'm doin a coil conversion on a 47' running a 3.8 and auto I m just working out what link setup to run I've looked at the hilux of luky 4X4 customs and its nice and simple. then theres the standed 80 series setup very simple maybe even run a X link but hav heard they are over rated ?? not sure. then there is a 5links setup which flex well and I hav heard hav poor in road manners??

So whats ur thoughts Its not a daily driver and fabricating isnt an issue as Im and engineer but just trying to work out the best way of goin
Posts: 51
Joined: Sun Oct 29, 2006 4:48 pm
Location: sunnycoast

Post by gir80 »

5 link bud, the x link is too ova rated, the 5 link gives you a lot more flex im am just about to do it to my 80
FLAT BROKE RACING 1993 gxl 80 ute, caged, lifed, locked, 37 trepedors, and rareing to go
100series gxl 4inch lift more mods to come
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Post by Z()LTAN »

if you can do it, the triangulated 4 link shits all over a 5 link
Locktup4x4.com.au - For all of your hardcore gear

Outlaws4x4.com
Posts: 2183
Joined: Sun Feb 27, 2005 4:15 pm
Location: newy

Post by evanstaniland »

3 link panhard also works well i have that in the front and rear of my bundy

Image

Evan
www.energizedracing.com
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

I imagine you would have problems fitting a 4link, but the 3 link + panhard is easier to fit, anything you do will handle as well as it is set up
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Post by Z()LTAN »

its only a matter of making another cross member in front of the trans one.

i spose its not for everyone though.


I just like the physics of the tri4link :cool:
Locktup4x4.com.au - For all of your hardcore gear

Outlaws4x4.com
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

Z()LTAN wrote:its only a matter of making another cross member in front of the trans one.

i spose its not for everyone though.


I just like the physics of the tri4link :cool:
agreed, I think a 4link gives you the best of both worlds, but it depends on the engine and chassis and lift etc, it no good putting a badly set up 4 link in coz that would will fit if you can get a well set up 3link panhard of 5 link set up
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Post by Z()LTAN »

agreed tiny
Locktup4x4.com.au - For all of your hardcore gear

Outlaws4x4.com
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

my home built cross link flexs quiet well in my 80, and drives like a std 3 link when u lock it off.

To put it into perspective they are 38's that its dropping below the sills..
Shits all over the std 3 link set up...
and my arms are flipped to, which im sure does help a fair bit



Image

Image
Last edited by crankycruiser on Sun Aug 24, 2008 6:54 pm, edited 1 time in total.
User avatar
HG
Posts: 450
Joined: Mon Aug 02, 2004 10:11 pm
Location: Mexico where the hills are big

Post by HG »

My 5 link handles grouse on the road and flexes nicely off road too.
I cheated and had Cheezy Racing do the work, the day it was finished I drove 800kms to Eden :armsup: .
Cheers
Andrew
----------------------
Just a few mods, nothing over the top.:)
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests