Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Pushlock Fittings

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 41
Joined: Thu Dec 02, 2004 2:55 pm
Location: Wollongong

Pushlock Fittings

Post by FastEddie »

I'm after some info on where to get 5mm pushlock fittings to replace the airlocker olive fitting at the diff. SMC tell me they dont make them and none of the hydaulics mobs around here can help. Any help to steer me in the right direction would be apreciated. (and yes I seached)
Thanks
Eddie
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

Have you thought about using the ARB heavy duty airline kit? It's excellent.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Festo - www.festo.com

Sang-a

Gwagensteve - I'm sure one of the above could sell an equivalent for less $
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 1076
Joined: Tue Jul 27, 2004 8:49 am
Location: cashmere

Post by eliteforce32 »

try any modern truck spare parts joint... they have all these fittings for air systems ;)
Eliteforce Heavy Fabrication
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
Top
Posts: 1451
Joined: Sat Mar 18, 2006 1:25 pm
Location: hilux is in NSW.. Im in WA again

Post by brad 93hilux »

hey eddie, ill have to check, but i think i have some at home....

Otherwise try complete hydraulics in port kembla.

Brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Top
User avatar
Tiny
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Contact:
Contact Tiny

Post by Tiny »

x2 on the festo, I used festo on my rig, they are very simple and far stronger than arb stuff
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Ive used Festo but you can also run 6mm line and use the more common 6mm fittings.

Bazzle
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

I have changed my airline over to 6mm and used hydrolic line from the diff to chassis. I had 2 hydrolic lines made at louis hoses and seals for the same price as 1 ARB.
Last edited by nastytroll on Tue Aug 19, 2008 12:14 pm, edited 1 time in total.
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

bazzle wrote:Ive used Festo but you can also run 6mm line and use the more common 6mm fittings.

Bazzle
Sang-A (and I am pretty sure festo as well) make pushlock fittings in a range of sizes - 4mm/6mm/8mm etc.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 73
Joined: Thu Apr 17, 2008 2:36 am
Location: townsville

Post by Man of Cheese »

try pirtex or enzed they have a lot of stuff or could find it for you
who would win between a grilled cheese sandwich and a taco?
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 131 guests