Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Pushlock Fittings
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Pushlock Fittings
I'm after some info on where to get 5mm pushlock fittings to replace the airlocker olive fitting at the diff. SMC tell me they dont make them and none of the hydaulics mobs around here can help. Any help to steer me in the right direction would be apreciated. (and yes I seached)
Thanks
Eddie
Thanks
Eddie
Festo - www.festo.com
Sang-a
Gwagensteve - I'm sure one of the above could sell an equivalent for less $
Sang-a
Gwagensteve - I'm sure one of the above could sell an equivalent for less $
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
hey eddie, ill have to check, but i think i have some at home....
Otherwise try complete hydraulics in port kembla.
Brad
Otherwise try complete hydraulics in port kembla.
Brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Road Ranger
I have changed my airline over to 6mm and used hydrolic line from the diff to chassis. I had 2 hydrolic lines made at louis hoses and seals for the same price as 1 ARB.
Last edited by nastytroll on Tue Aug 19, 2008 12:14 pm, edited 1 time in total.
Sang-A (and I am pretty sure festo as well) make pushlock fittings in a range of sizes - 4mm/6mm/8mm etc.bazzle wrote:Ive used Festo but you can also run 6mm line and use the more common 6mm fittings.
Bazzle
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Who is online
Users browsing this forum: No registered users and 7 guests