Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

need help quick!

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 22
Joined: Thu Feb 14, 2008 12:03 pm
Location: corindi

need help quick!

Post by billabong »

i need to no if a 4.2 gq petrol diff is the same as a 4.2 diesel diff
NOW THATS UNBREAKABLE !

http://www.billabongfurniture.com.au/
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: need help quick!

Post by bogged »

billabong wrote:i need to no if a 4.2 gq petrol diff is the same as a 4.2 diesel diff
diff housing or the diff ratios?
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

dif housings yes,
manual 4.2 petrol and manual 4.2 diesel have 4.1 ratios,
auto petrol have 3.9 ratios
manual 3.0L petrol have 4.3 ratios
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

ozy1 wrote: manual 4.2 petrol and manual 4.2 diesel have 4.1 ratios,
auto petrol have 3.9 ratios
manual 3.0L petrol have 4.3 ratios
Wow, that's a bold statement!

IMHO they are a bit more varied than that. You need to check the vehicle basically.
This is not legal advice.
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

chimpboy wrote:
ozy1 wrote: manual 4.2 petrol and manual 4.2 diesel have 4.1 ratios,
auto petrol have 3.9 ratios
manual 3.0L petrol have 4.3 ratios
Wow, that's a bold statement!

IMHO they are a bit more varied than that. You need to check the vehicle basically.
well it is what they were meant to be fitted with from the factory in the GQ's, but whats in there could be different depending on previous owners and mechanics but its what should be in there, and from what i have seen with all the factory ones ive looked at seem pretty close to the money,
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

the rears come in a few flavours as well with the H260 and the H233. There is also a full floating H260 rear that came in the tray leaf spring rear MQ,GQ and GU utes .. I dotn know much about them except they are h260's with full float 37 spline axles.

The H260 is ohysically much bigger in the centre, the housing is easily identified by the small flat section about 6cm wide on the bottom of the housing.


Ratios that Ozy said are correct for factory applications.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 14 guests