Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Concerns with too much castor?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 2
Joined: Fri Dec 08, 2006 12:25 pm

Concerns with too much castor?

Post by rascal75 »

I currently have a GUIV with 4" spring lift.
I had castor bushes fitted but it still wanders too much for my liking.

I am thinking now about going drop boxes, but dont want to spend extra to remove the castor bushes and refit std ones.

What problems will there be if I fit the drop boxes and leave the castor bushes in there. ie too much castor correction..

The extra castor would just mean heavier steering and more self centering???
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

factory jeeps run about 7°, i don't think you'll have a drama.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Yom
Posts: 1233
Joined: Tue Oct 16, 2007 1:13 pm
Location: Brisbane

Post by Yom »

Do it and then get some measurements done.

It could be within limits.

If its not, you're best to put OEM slotted bushings back in.
Posts: 1836
Joined: Wed Aug 11, 2004 10:41 am
Location: Brisbane

Post by badger »

you will have issues with the front uni joint
1hd-fte 5 speed tiptronic 105 series
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold

i think i have a problem
Posts: 44
Joined: Sun Aug 07, 2005 8:33 pm
Location: Cairns QLD

Post by exV8er »

too much caster lead.

(draw a line through the top & bottom king pin or ball joint and then project it down to the ground. The distance from that point to where the tire actually touches the ground is called caster lead.) This is directly caused by caster angle.

If castor angle is to high it will cause death wobbles.

1.5 - 4 (max) degrees of castor we've found to be OK. but more could be bad!!

You could get the rear offset bushes rotated 180' so they don't give caster correction. The arms will sit a little bit lower but wont hurt any thing..
whitemav wrote: Did I get my answer ? Yes, in 2 post's out of 4 pages of which half are utter bull shit and off topic nit picking.
Posts: 303
Joined: Wed Nov 24, 2004 8:25 pm
Location: gold coast

Post by mavzilla »

did caster bushes, and caster plates later on ,and left the bushes in, guess what they shake the same as not enough caster in the front
wish list (lockers,lift,endless air,winch,bar,spotties,35s,paint job,turbo,18yrs old hottie
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Post by PGS 4WD »

Excessive caster won't cause death wobbles unless there is another underlying problem, there are other fixable causes for wheel wobble.
It will make the steering heavy at low speeds and may put extra stress the front uni due to the angles. Don't be concerened about running a little extra, most late model vehicles run high castor for high speed stability. You are better off with stock bushes though as they offer better flexibility as they are a centred bush, they will last longer to if you use genuine ones.

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

What Joel said ^^^
Posts: 1285
Joined: Thu Jan 15, 2004 8:22 pm
Location: gold coast

Re: Concerns with too much castor?

Post by uninformed »

rascal75 wrote:I currently have a GUIV with 4" spring lift.
I had castor bushes fitted but it still wanders too much for my liking.

I am thinking now about going drop boxes, but dont want to spend extra to remove the castor bushes and refit std ones.

What problems will there be if I fit the drop boxes and leave the castor bushes in there. ie too much castor correction..

The extra castor would just mean heavier steering and more self centering???
im guessing the castor bushes are the hard poly type?

if so, why the hell would you keep these in a 4x4???

Serg
Posts: 818
Joined: Thu Nov 20, 2003 9:06 am
Location: Bathurst NSW

Post by professor »

Just to give an idea the v8 super cars run 20 deg castor and they are very hard to steer at low speeds with no power steer just to give you an idea.

Chad
Posts: 44
Joined: Sun Aug 07, 2005 8:33 pm
Location: Cairns QLD

Post by exV8er »

mavzilla wrote:did caster bushes, and caster plates later on ,and left the bushes in, guess what they shake the same as not enough caster in the front
you got it..

PGS 4WD. Ever see a shoping trolley with carster slap?
I have....
whitemav wrote: Did I get my answer ? Yes, in 2 post's out of 4 pages of which half are utter bull shit and off topic nit picking.
Yom
Posts: 1233
Joined: Tue Oct 16, 2007 1:13 pm
Location: Brisbane

Post by Yom »

PGS 4wd is right - castor alone will not cause live axle wheel wobbles.
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

Yom wrote:PGS 4wd is right - castor alone will not cause live axle wheel wobbles.
X3. Caster slap only occurs when the trolley wheels are loose or bent, not on new, tight trolleys.

We have death wobble problems with suzukis and while it can be effected bu caster, caster isn't the cause.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 44
Joined: Sun Aug 07, 2005 8:33 pm
Location: Cairns QLD

Re: Concerns with too much castor?

Post by exV8er »

rascal75 wrote:I currently have a GUIV with 4" spring lift.
I had castor bushes fitted but it still wanders too much for my liking.

I am thinking now about going drop boxes, but dont want to spend extra to remove the castor bushes and refit std ones.

What problems will there be if I fit the drop boxes and leave the castor bushes in there. ie too much castor correction..

The extra castor would just mean heavier steering and more self centering???

Go heaps of carster and tell us how it goes. you'll have 6-7 degrees IMHO.

bet ya it wobbles...
whitemav wrote: Did I get my answer ? Yes, in 2 post's out of 4 pages of which half are utter bull shit and off topic nit picking.
Yom
Posts: 1233
Joined: Tue Oct 16, 2007 1:13 pm
Location: Brisbane

Re: Concerns with too much castor?

Post by Yom »

exV8er wrote:
rascal75 wrote:I currently have a GUIV with 4" spring lift.
I had castor bushes fitted but it still wanders too much for my liking.

I am thinking now about going drop boxes, but dont want to spend extra to remove the castor bushes and refit std ones.

What problems will there be if I fit the drop boxes and leave the castor bushes in there. ie too much castor correction..

The extra castor would just mean heavier steering and more self centering???

Go heaps of carster and tell us how it goes. you'll have 6-7 degrees IMHO.

bet ya it wobbles...
Only because patrols front end is crazy sensitive and requires someone who knows what they're doing when overhauling it and absolutely no wear/movement ANYWHERE in the linkages and bearings which is guaranteed not to exist in a vehicle thats travelled more than 100,000km on our roads IF it hasn't ever been completely overhauled with brand new components ;)
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest