whats involved in doing a SAS on an 88 surf? i know about cutting all the ifs gear off ,do i have too remount the p/s box?ive got a TG hi steer kit for it , can i use a standard front spring mount off a hilux or dropped one?
can i copy a LFS 4 runner the way every thing bolts up,cause i have one with all the gear in it, 4 inch springs with 3 inch shackles,2 inch body lift etc.... any advice would be great Daniel
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
question about SAS on a surf
Moderators: toaddog, Elmo, DUDELUX
Overkill did my SAS on my old Surf but I can answer a bit for you..
Your steering box stays where it is (but advisable to strengthen the chassis as mine and a mates both cracked around the bolt tubes) using cross over steer.
I had fabbed front spring mounts which where the same as a standard lux mount - except a standard lux spring mount I think also incorperates a body mount.
The rear of the front spring used a "normal" shackle mount under the chassis which was the same as a longer shackle in a standard lux as they bolt through the chassis with a anti-crush tube.
I had standard height springs -no lift- which equalled a 4" lift in the rear coils (mine was a 94 Surf).
Hope that helps a bit,
Alec
Your steering box stays where it is (but advisable to strengthen the chassis as mine and a mates both cracked around the bolt tubes) using cross over steer.
I had fabbed front spring mounts which where the same as a standard lux mount - except a standard lux spring mount I think also incorperates a body mount.
The rear of the front spring used a "normal" shackle mount under the chassis which was the same as a longer shackle in a standard lux as they bolt through the chassis with a anti-crush tube.
I had standard height springs -no lift- which equalled a 4" lift in the rear coils (mine was a 94 Surf).
Hope that helps a bit,
Alec
GO the 80...The mods have started :-)
Daniel, give locktup 4x4 a ring (they are in Perth), they sell TG gear and have dealt with this on a rig before.
http://www.locktup4x4.com.au/Default.aspx
Have a read of this .... http://www.locktup4x4.com.au/forum/defa ... posts&t=58
http://www.locktup4x4.com.au/Default.aspx
Have a read of this .... http://www.locktup4x4.com.au/forum/defa ... posts&t=58
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Coil SAS by www.budscustoms.com.au
SAS on a surf
cheers guys for the advice the pics on locktup site look piece of piss cheers for the info daniel
Who is online
Users browsing this forum: No registered users and 102 guests