Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hilux Diff weight

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 242
Joined: Thu Jun 15, 2006 10:24 pm
Location: sydney

Hilux Diff weight

Post by hyzook »

I have just snapped a chromoly rear axle in a Sierra and I am considering Hilux/Bundy diffs, searching tells me Sierra diffs weigh in at 40/60kg rear/front but I havn't found any weights on the Toyota diffs. My engineer is happy to cert the mod but is concerned about the weight as the GVM of the sierra is so low (there is countless other mods allready on it)

Anyone Know???
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

i know theyre DAM heavy... i tried lifting one end of a lux rear ages ago and struggled (i didnt expect it to be as heavy as it was)... i'd say they'd easily be in the 80kg range... perhaps call by a wrecker with your g/f or wifes scales??? =P
The worst thing about censorship is ███████.
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

i built a custom rear diff and the engineer actually up'd my gvm.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Posts: 918
Joined: Sun Aug 20, 2006 11:46 am
Location: Western Brisbane

Post by Highway-Star »

alien wrote:i know theyre DAM heavy... i tried lifting one end of a lux rear ages ago and struggled (i didnt expect it to be as heavy as it was)... i'd say they'd easily be in the 80kg range
The rear is heavy but I don't think it would be quite 80kg... (maybe 65/70...)
The front Hilux diff is a monstosity. I would think over 100kg. After my father and I rebuilt his Hilux front end, we had to use a 1/2 ton block and tackle to get the complete axle off the bench onto the floor. This was one of the post '84 housings with the bottom side gusset.

Wish I had hard numbers, but I don't own anything man enough to measure stuff this heavy.
Wheeling on completely wicked angles, without even looking stable.
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

maybe try the Toyota section?
Ransom note = demand + collage
Posts: 242
Joined: Thu Jun 15, 2006 10:24 pm
Location: sydney

Post by hyzook »

Thanks for the info and tips so far, I questioned the GVM in regards to raising it and he claims it runs off the chassis however whilst not easy he may be able to get some more out of it so I will see how we go. I am still in the researching the swap and not 100% sure I will do it but I see no other option at this stage and apart from time and money I can see no disadvantage to the swap. Any other diffs (60, 80, patrol) I feel will be a fair bit heavier and probably much stronger than I need.

Mark
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

if you're doing hilux diffs you might aswell beef the chassis up while you're at it... then you can probably raise the GVM a fair bit.

This said though, my zuk with the 1.6l 8v engine, extractors, 2" pipe, hilux leaves, 31's on 15x7s, 25mm MDF in the rear door with stereo, speakers and a soft top full of water weighed in at 1040kg... i dare say without the bucketing rain at the time i'd have been around 1020kg - drop the MDF, speakers and stereo and ill be down about 1005kg... lose the softop and get about 1000kg etc etc.

You could also look into some alloy rims to save some weight =)

I wouldnt go as far as helium in the tyres tho! haha
The worst thing about censorship is ███████.
Posts: 91
Joined: Sun Jun 29, 2008 8:12 pm
Location: sydney

Post by zoook »

tommorow night i will tell you what they weigh in got a pair in the shed ready to go in and will weigh em for you
Posts: 242
Joined: Thu Jun 15, 2006 10:24 pm
Location: sydney

Post by hyzook »

alien wrote:if you're doing hilux diffs you might aswell beef the chassis up while you're at it... then you can probably raise the GVM a fair bit.

This said though, my zuk with the 1.6l 8v engine, extractors, 2" pipe, hilux leaves, 31's on 15x7s, 25mm MDF in the rear door with stereo, speakers and a soft top full of water weighed in at 1040kg... i dare say without the bucketing rain at the time i'd have been around 1020kg - drop the MDF, speakers and stereo and ill be down about 1005kg... lose the softop and get about 1000kg etc etc.

You could also look into some alloy rims to save some weight =)

I wouldnt go as far as helium in the tyres tho! haha

Mine LWB is a fair bit heavier, it has alloys but with 33's plus bull bar, winch, 8 point cage, rails, rear bar etc its gotten very heavy so going to the weigh bridge allready involves alot of stripping. I just need the weights to compile with other info I am gathering as I like to present the engineer with the proposed mods all thought out and have some figures to show, things generally run easier that way.

zoook wrote: tommorow night i will tell you what they weigh in got a pair in the shed ready to go in and will weigh em for you
Thanks zoook that would be great.

Mark
Posts: 91
Joined: Sun Jun 29, 2008 8:12 pm
Location: sydney

Post by zoook »

hilux diff weights....mine are from 84 lux 4.3s

method of weighing not very scientific it was a milk crate with plywood on top and bathroom scales on that with my lump of a teenage son balancing them. misses still going off about oil on the scales.... :shock:

rear complete housing drum to drum with oil still in weighed at 68kgs
front complete disk to disk with steering arms and crossmembers attached with oil still in weighed a whopping 93 kgs

if anyone sees a little brown fury thing on the ground please mail in back to me its my ring ....hope this helps
Posts: 1255
Joined: Thu Jul 03, 2003 8:07 pm
Location: Coffs Harbour

Post by STUMPY »

zoook wrote:hilux diff weights....mine are from 84 lux 4.3s

method of weighing not very scientific it was a milk crate with plywood on top and bathroom scales on that with my lump of a teenage son balancing them. misses still going off about oil on the scales.... :shock:

rear complete housing drum to drum with oil still in weighed at 68kgs
front complete disk to disk with steering arms and crossmembers attached with oil still in weighed a whopping 93 kgs

if anyone sees a little brown fury thing on the ground please mail in back to me its my ring ....hope this helps
Funny shit mate. good tech though :D
DX80 35's twin locked turbo diesel = TANG
www.jaybeecanvas.com
Posts: 242
Joined: Thu Jun 15, 2006 10:24 pm
Location: sydney

Post by hyzook »

zoook wrote:hilux diff weights....mine are from 84 lux 4.3s

method of weighing not very scientific it was a milk crate with plywood on top and bathroom scales on that with my lump of a teenage son balancing them. misses still going off about oil on the scales.... :shock:

rear complete housing drum to drum with oil still in weighed at 68kgs
front complete disk to disk with steering arms and crossmembers attached with oil still in weighed a whopping 93 kgs

if anyone sees a little brown fury thing on the ground please mail in back to me its my ring ....hope this helps
Thanks heaps, this helps alot. 60kg more is not too bad really.
Posts: 918
Joined: Sun Aug 20, 2006 11:46 am
Location: Western Brisbane

Post by Highway-Star »

zoook wrote: rear complete housing drum to drum with oil still in weighed at 68kgs
front complete disk to disk with steering arms and crossmembers attached with oil still in weighed a whopping 93 kgs
Cool my estimates were reasonably close :D

Thanks, good stuff to know.
Wheeling on completely wicked angles, without even looking stable.
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

musta been a front i was trying to lift then =)
The worst thing about censorship is ███████.
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests