Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

gq flywheel bolts tension

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 37
Joined: Tue Jul 18, 2006 11:15 am
Location: shepparton victoria

gq flywheel bolts tension

Post by rob_rover »

as above
Top
Posts: 217
Joined: Mon Aug 07, 2006 8:27 pm
Location: Somerville, Vic OZ

Contact:
Contact on4tou

Post by on4tou »

147-167 Nm
steve
Top
Posts: 1040
Joined: Fri Jun 29, 2007 7:57 pm
Location: yatala, halfway between brisbane and GC

Post by love ke70 »

on the note of bolt tensions.
whats with most of the bolts having a range not a set figure?
do people normally centre the range? or go to the lower then the higher?
cheers, andrew
97 GQ patrol coilcab. TD42, safari turbo kit with fiddled turbo, D-GAS kit. dyno results to come...
4inch lift, king springs, efs and procomp shocks
315/70R16 cooper ST's
found fuel economy...
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

i always go centre for the second tighten just incase my wrench is out by a few (it only cost 100 bucks)
turbos are nice but i'd rather be blown
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest