Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GQ Front Inner Axle Seal?
GQ Front Inner Axle Seal?
Ive ran a search but with no answers.
Im doing my front inner axel seals this weekend on the troll, in the gregorys it say that the seal is flush with the inside of the axle trunnion, but i just went into nissan and they said it was right inside near the diff bearings ?
Anyone done this job recently?
Want to know what im in/looking for.
Cheers
Steve
Im doing my front inner axel seals this weekend on the troll, in the gregorys it say that the seal is flush with the inside of the axle trunnion, but i just went into nissan and they said it was right inside near the diff bearings ?
Anyone done this job recently?
Want to know what im in/looking for.
Cheers
Steve
seal
Hammer and screwdriver,but don't damage the diff,hit the screwdriver into the outer edge of the seal, they come out pretty easy. Buy the seal from a bearing place instead of genuine, about $10-15.. Use a socket slightly smaller in diameter to the seal on knock it in square...
I did my GU a while back and there is only one seal and it sits right near the knuckle. In the skinny bit of the diff housing. Easy to get to mate!
GQ should be similar as far as I know.
GQ should be similar as far as I know.
2001 GU Patrol DX wagon, TD42, Air Lockers, twin spare carrier, Barrett HF, 35" Treps, high pinion rear, Staun beadlocks, 60l Engel and more!
Re: seal
X2paul44b wrote:Hammer and screwdriver,but don't damage the diff,hit the screwdriver into the outer edge of the seal, they come out pretty easy. Buy the seal from a bearing place instead of genuine, about $10-15.. Use a socket slightly smaller in diameter to the seal on knock it in square...
Just did kit on my Patrol. Very straight forward. I used this method exactly, when removing and replacing that seal.
96 GQ LWB, Rd28T, nothing exciting, but CLEAAAAAN. 2" Kings flexy's, long shocks, custom dump, 3" zorst, fuel screw meddled with.
Thanks heaps for the info lads !
Got them out! Piece of piss!!!
Only prob now is the King Pin Bearings Wish I new that these would be a prick, doesn't say anything in the gregorys about pressing them out . Would have done it on friday if i new! Any one know any tricks? Tried pullers (no go), tried screwdivers (no go), tried vice, drift and BFH and no go... Any other ideas (other than a press) or is it wait till monday?
Cheers
Got them out! Piece of piss!!!
Only prob now is the King Pin Bearings Wish I new that these would be a prick, doesn't say anything in the gregorys about pressing them out . Would have done it on friday if i new! Any one know any tricks? Tried pullers (no go), tried screwdivers (no go), tried vice, drift and BFH and no go... Any other ideas (other than a press) or is it wait till monday?
Cheers
dont recomend it but i rip the bearing apart then grind a thin slice in the top of the bearing race that is still press on. i get my trusty splicing screwdriver (old flat head driver) and very carefully beat the shit out of the driver on the slie i made till it cracks right through.
use a press.
use a press.
turbos are nice but i'd rather be blown
Doesn't that just piss you off??!!! All that time with that stinking diff oil and CV grease, only to find out you have to do it all over again.rastaman75_ wrote:jeez wish i had of thought of that. did mine the other weekend and cut em off with a grinder, best not take my advice tho...after one weekend in the bush bot my inner axle seals are leaking again. oh bother... better go get another carton
happened to me a few times. tried putting them in the opposite way and everything. i then went and bought some from ripco and they are the best ive had.coxy321 wrote:Doesn't that just piss you off??!!! All that time with that stinking diff oil and CV grease, only to find out you have to do it all over again.rastaman75_ wrote:jeez wish i had of thought of that. did mine the other weekend and cut em off with a grinder, best not take my advice tho...after one weekend in the bush bot my inner axle seals are leaking again. oh bother... better go get another carton
turbos are nice but i'd rather be blown
[/quote]
Doesn't that just piss you off??!!! All that time with that stinking diff oil and CV grease, only to find out you have to do it all over again.[/quote]
Can I just ask what type or brand of grease everyone is using when packing cv's? lithium based and/or molybdenum disulphide? no2 no melt?
Gettin different opinions from too many people who don't know anything about 4wding
cheers
Doesn't that just piss you off??!!! All that time with that stinking diff oil and CV grease, only to find out you have to do it all over again.[/quote]
Can I just ask what type or brand of grease everyone is using when packing cv's? lithium based and/or molybdenum disulphide? no2 no melt?
Gettin different opinions from too many people who don't know anything about 4wding
cheers
1991 GQ TD42 Safari, 5spd, 4" Lift, 35" shovels, Locked & Loaded.
he
ex nissan emplyee here
there is only one right near the knuckle but the nissan parts catalouge shows it towards the diff for some reason so a parts guy thats not familiar with patrols gets confused easily part number should be 40533-01j00 or something similar
cheers
ex nissan emplyee here
there is only one right near the knuckle but the nissan parts catalouge shows it towards the diff for some reason so a parts guy thats not familiar with patrols gets confused easily part number should be 40533-01j00 or something similar
cheers
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Andy
Andy
Who is online
Users browsing this forum: No registered users and 33 guests