Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
NH gear lever boot
Moderator: -Scott-
NH gear lever boot
hi ya the boot on my gear leaver has given out and spilling oil out the top genuine ones cost $380 for the whole lever, any ideas on fixing this for cheaper tried a bunch of wreckers and nothing.... any ideas would be great need it fixed to sell it.....
I saw a picture in a magazine of a dodgy CV boot made from duct tape - lots of overlapping vertical strips, with more strips wrapped around at top and bottom. Was intended as an emergency measure, and apparently held up for hundreds of km.
If you fashion something similar you might be able to use hose clamps top and bottom to hold in place? If not, maybe cable ties?
If you fashion something similar you might be able to use hose clamps top and bottom to hold in place? If not, maybe cable ties?
Who is online
Users browsing this forum: No registered users and 0 guests