Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hilux rear disc brake - AGAIN

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

Funny you say that as I have been woundering that myself over the last week or 2. I think on mine they would be, if not I could very easily mod the lever on the caliper so it gets more leverage.
Next time we go out I sound just unbolt the rear tail shaft and try it ;)
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

Why would you use the cable brake as the cutting brakes?? Go hydraulic cutting brakes.

Here is the master cylinder I might use.
Has both threaded fittings. One single flare and one double flare.

http://cgi.ebay.com.au/Land-Rover-DISCO ... dZViewItem
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 1650
Joined: Wed Jun 06, 2007 10:12 pm
Location: ipswich

Contact:
Contact sloshy

Post by sloshy »

Willy Hilux wrote:Why would you use the cable brake as the cutting brakes??
Because its already there, I think it is so much easier, no more extra brake lines / fluid / fluid reservoir just a couple of cables, cheap and easy to home fab and adjust. And its a whole seperate system to your normal brakes. I will be trying mine this way. But still let us know how you go, I could be wrong.
cheers Dan

Licenced Carpenter
I do everything, free quotes
Brisbane west/Ipswich/rural
PM me
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

If your hand brake will work why do you need a lever?
Wank factor?
Only thing I can think of is when needing to go on/off/on/off with the rear brakes. But if its only for socail driving does it matter if it takes 5 secs longer?
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

If you didn't want another stick you could get a line lock kit and run it in the rear line :D if the handbrake holds like it should it won't be a drama. another way would be fit a tap for the rear brake line in the cab somewhere, Brakes on, close tap so it holds pressure to the rear then open tap so it relases pressure when your done one other benifit of doing it with a tap is you can totaly cut out the rear brakes if you nedd to line lock it for some reason.
plenty of parts on the bench
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

Air over Hydraulic is the way to go. Just a flick of a switch. On/Off.
And maybe WANK FACTOR!!
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 454
Joined: Mon Nov 06, 2006 5:05 pm
Location: campbelltown sydney

Post by coopster »

has anyone tried a set of rodeo 4x4 front disc they are 257mm not 302mm like hilux

plus has anyone looked at nissan silvia caliper they have cable handbrake but only take a 9mm thick disc i think that the soild lux disc are about that

hope to hear a reply

thinking of doing it soon
hilux dualcab white
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 4 guests