Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

slider grip tape

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 309
Joined: Sun Mar 05, 2006 9:00 pm
Location: Melbourne

slider grip tape

Post by ash_on_mtb »

I searched, I really did, but I couldn't find any thoughts on that 3M grip tape that many people use atop their sliders instead of chequerplate...?

Where can I get it, is there a better alternative, and price when *you* bought it last?

Thanks,
'97 HDJ80 - worth the wait
Top
Posts: 1124
Joined: Fri Aug 03, 2007 4:14 pm
Location: Douglas park

Post by joshy »

if your talking about the grip stuff you just stick on, you can get it from hardware stores, bought some for my skateboard...but thats goin back 2-3 years, wasnt expensive.
D22 Navara....hydro coilovers, hydro steer, 42's...
76 Landcruiser tow rig
Top
Posts: 1308
Joined: Tue Sep 23, 2003 10:17 pm
Location: BADFABING

Post by turbo gu »

i just bought a roll of the 3M stair tape about 50mm wide and it lasts ages. lots of rock rash and its still there. From bunnings its about $35 bucks for the roll
GU 42td wagon for touring
GU ute for the fun stuff
http://www.allterrain4wd.org.au/
Top
Posts: 280
Joined: Mon Mar 05, 2007 11:22 pm
Location: Cedar Grove

Post by rut rat »

You can also get it at a sports store.
Top
Posts: 15
Joined: Sat Jul 19, 2008 6:26 pm
Location: Central Coast

Post by beerdog »

you can also get it from boat supply stores, who always seem to have it in a lot more width sizes for different application. It's used alot as non slip boat deck grip.

Would have to be one of the best mods I've done in the past. Sliders, rear bar and also a bit on the top surfaces of the main bar section of the bullbar (the flat areas just below the headlights if you know what I mean).

Any where you might need to climb off when you are up to your freckle in a bog hole trying to get to the snatch strap you attached earlier just in case.......you're nodding aren't you....you've been there before.

Simple and cheap!
Top
Posts: 16
Joined: Thu Jul 10, 2008 11:20 pm
Location: Melbourne

Post by PeterM »

Or any safety shop like RSA, Gas and Gear etc.
Top
Posts: 1345
Joined: Wed Jul 18, 2007 7:15 pm
Location: Jimboomba

Post by SIM79 »

Bunnings sells it.
Top
Posts: 309
Joined: Sun Mar 05, 2006 9:00 pm
Location: Melbourne

Post by ash_on_mtb »

sweet, thanks fellahs.
'97 HDJ80 - worth the wait
Top
Posts: 71
Joined: Fri Jun 01, 2007 5:41 pm
Location: crazy house

Post by robsrunner2 »

i got mine from supercrap and its been on for over two years and still good. its about 500mm wide.
for details of my truck see
http://www.outerlimits4x4.com/ftopic145063.php
Top
Posts: 693
Joined: Sun Sep 26, 2004 2:37 pm
Location: Rochedale South - Brisbane

Post by benhl »

robsrunner2 wrote:i got mine from supercrap and its been on for over two years and still good. its about 500mm wide.
you must have HUGE sliders :finger:
GU 4.2 TD Garrett BB Hi-flow, M8274 + Bells & Whistles with plenty of fruit still on the list!
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
Top
Posts: 71
Joined: Fri Jun 01, 2007 5:41 pm
Location: crazy house

Post by robsrunner2 »

oops, 50mm wide :oops: :oops: :finger: :P
for details of my truck see
http://www.outerlimits4x4.com/ftopic145063.php
Top
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Post by lump_a_charcoal »

benhl wrote:
robsrunner2 wrote:i got mine from supercrap and its been on for over two years and still good. its about 500mm wide.
you must have HUGE sliders :finger:
Nah they are outriggers!
Top
Posts: 1423
Joined: Thu May 26, 2005 7:00 pm
Location: Central Coast, NSW

grip

Post by klrevo »

yhe supercheap have the 3m stuff, get a few metres long by 50mm wide.

dean, ;)
Top
Posts: 1590
Joined: Fri Jun 03, 2005 7:07 pm
Location: Tarneit, Vic

Post by matt.mcinnes »

Mine have spot welds work a treat too.

Image
http://www.fj40-2f-eti-locked-n-loaded.com

Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

A few years back I bought a sheet designed for a skateboard deck - $10 from a surf shop, from memory.

I used a bit to wrap a handgun frame, to provide better grip. When the government bought the gun back (5 years ago now :cry: ) they added $90 to the price for the "aftermarket grip." :lol:
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests