hi all
i have a 4.2 dule fule and want to hook up the snorkel
been waighting for the gas place for about 4 mounths and
was wondering can i buy this gas fitting part to let me put the air box on top somewere else
or have they given me a bumb steer and nobody knows what i an talking about
if so can someone tell me how to do it there is a gas carby on top and i have all the oraginal snorkel parts but need a box to go around the carby and then get the gas plumbed back in to it i can tig up some stainless to hook up the box and can fab the box if i have to but need the gas plunbed back in
please help its driving me insane having to drive around all the bog holes that go over the bonet
thanks chris
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
snorkel on carby?
if u run a std snorkle on a carbied car you will have to increace your gas mix, as the pressureised air will blow most of the gas out of the carbie, unless you run the head backwards then its fine, i made an adaptor (duct tape) to fit ss tube to the square tube on the airbox intake 

Maverick. Unlocked on 35's MOTTO: Lock, Stomp & Hold on
G'day,
Thought I would ask in here instead of starting another topic.
I'm about to put gas on my GQ, but planning on a Snorkle shortly also.
I have read alot about you need to have a breather hose ect and get it retuned if putting a snorkle on with gas.
Now would it be easier/wiser to put the snorkle on before I get the conversion done??
And would the shop tune it properly?? Or would they have to do mods to the airbox ect??
I guess what Im wondering is, if a shop will do a gas conversion with a snorkle on?? Saving me having to get it retuned later one.
Any help would be great, thanks a heap in advance
Tommo
Thought I would ask in here instead of starting another topic.
I'm about to put gas on my GQ, but planning on a Snorkle shortly also.
I have read alot about you need to have a breather hose ect and get it retuned if putting a snorkle on with gas.
Now would it be easier/wiser to put the snorkle on before I get the conversion done??
And would the shop tune it properly?? Or would they have to do mods to the airbox ect??
I guess what Im wondering is, if a shop will do a gas conversion with a snorkle on?? Saving me having to get it retuned later one.
Any help would be great, thanks a heap in advance

Tommo
All you need is a reasonable size balance line from the converter atmospheric port to the air intake duct and then tuning, not fitting a balance line and richening the mixtures is not satisfactory as the mixture will be much richer at 60 kph than 100 kph.
Joel
Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
It probably does not matter if you put the snorkel on before or after the gas install, in my experience gas installers dont tune the engine correctly, all they do is get if running and idling and then sugest that you get it dynoed.
At least if you fit the snorkel after then you know it wont be chopped to fit the gas and will be water tight.
At least if you fit the snorkel after then you know it wont be chopped to fit the gas and will be water tight.
Who is online
Users browsing this forum: No registered users and 3 guests